logmgr fetch
Fetches logs from remote units if there is sufficient memory to store them locally.
Command Default
Fetching of logs is not enabled by default.
Parameters
- module
- Specifies a module or list of modules (separated by commas) from which logs are collected. Enter "all" to include all modules.
- sub-module
- Specifies a sub-module or list of sub-modules (separated by commas) from which logs are collected. Tou must enter "all" if multiple modules are specified. If only a single module is specified, then specify a single sub-module or list of sub-modules (separated by commas) belonging to the module.
- severity
- Specifies the severity level or list of severity levels (separated by commas) by which logs are collected. Enter "all" to include all severity levels.
Modes
Privileged EXEC mode
Usage Guidelines
Use the logmgr fetch command in
conjunction with the show log
debug command to view the logs.
Examples
The following example fetches the logs from remote unit 2.
device# logmgr fetch all all all 2
Batch Fetch Starting...units 2 in progress
Bytes Module/Submodule/Category (high=emerg,alert,crit,err low=warning,notice,info,debug)
UNIT 2
321560 infra/log_clf/high
331560 infra/log_clf/low
313560 infra/logmgr/high
323560 infra/logmgr/low
289560 infra/qos/high
299560 infra/qos/low
329631 infra/stacking/high
339633 infra/stacking/low
289560 l2/l2_sub/high
299560 l2/l2_sub/low
289560 l3/l3_sub/high
299560 l3/l3_sub/low
337560 mcast/mcast_sub/high
347560 mcast/mcast_sub/low
281560 nms/lldp/high
291560 nms/lldp/low
305560 nms/nms_sub/high
315560 nms/nms_sub/low
345560 platform/chassis/high
355560 platform/chassis/low
385560 security/security_sub/high
395560 security/security_sub/low
353570 system/system_sub/high
363560 system/system_sub/low
Fetch is complete
History
| Release version | Command history |
|---|---|
| 08.0.95 | This command was introduced. |