multi-stack-trunk
Creates both ends of a multi-port stacking trunk on a live stack.
Syntax
multi-stack-trunk
stack-unit/slot/port
to
stack-unit/slot/port
and
stack-unit/slot/port
to
stack-unit/slot/port
no multi-stack-trunk
stack-unit/slot/port
to
stack-unit/slot/port
and
stack-unit/slot/port
to
stack-unit/slot/port
Parameters
Modes
Stack unit configuration mode
Usage Guidelines
Use the command only when the trunk is live.
The first port in a stack trunk must be an odd-numbered primary port, for example, 3/2/1.
The
no form of this command removes the trunk configuration.
Examples
The following example converts two non-trunked links between stack unit 3 and stack unit 4 into a stacking trunk. The stacking trunk connects ports 3/2/1 and 3/2/2 on stack unit 3 and ports 4/2/1 and 4/2/2 on stack unit 4.
device# configure terminal device(config)# stack unit 1 device(config-unit-1)# multi-stack-trunk 3/2/1 to 3/2/2 and 4/2/1 to 4/2/2
History