show ip bgp vrf

Displays entries in the IPv4 Border Gateway Protocol (BGP4) routing table for a virtual routing and forwarding (VRF) instance.
Syntax
show ip bgp vrf vrf-name
show ip bgp vrf vrf-name ipv6 address/ /mask [ longer-prefixes ]
show ip bgp vrf vrf-name ip address/ [ /mask ] [ longer-prefixes ]
show ip bgp vrf vrf-name attribute-entries
show ip bgp vrf vrf-name dampened-paths
show ip bgp vrf vrf-name filtered-routes [ detail ] [ ip-addr { / mask } [ longer-prefixes ] ] | as-path-access-list name ] | prefix-list name ]
show ip bgp vrf vrf-name flap-statistics
show ip bgp vrf vrf-name flap-statistics ip-addr { / mask } [ longer-prefix ]
show ip bgp vrf vrf-name flap-statistics as-path-filter name
show ip bgp vrf vrf-name flap-statistics neighbor ip-addr
show ip bgp vrf vrf-name flap-statistics regular-expression name
show ip bgp vrf vrf-name nexthop [ ip-addr | reachable | unreachable ]
show ip bgp vrf vrf-name peer-group peer-group-name
show ip bgp vrf vrf-name summary
Parameters
vrf-name
Specifies the name of a VRF instance.
ipv6 address /mask
Specifies an IPv6 address and mask.
longer-prefixes
Specifies all statistics for routes that match the specified route, or that have a longer prefix than the specified route.
ip address /mask
Specifies an IP address and mask.
attribute-entries
Specifies BGP4 route-attribute entries that are stored in device memory.
dampened-paths
Specifies multiprotocol BGP (MBGP) paths that have been dampened by route-flap dampening.
filtered-routes
Specifies BGP4 filtered routes that are received from a neighbor or peer group.
detail
Optionally displays detailed route information.
as-path-access-list name
Specifies an AS-path ACL. The name must be between 1 and 32 ASCII characters in length.
prefix-list name
Specifies an IP prefix list. The name must be between 1 and 32 ASCII characters in length.
flap-statistics
Specifies the route flap statistics for routes received from or sent to a BGP4 neighbor.
as-path-filter name
Specifies an AS-path filter.
neighbor
Displays flap statistics only for routes learned from the specified neighbor.
ip-addr
IPv4 address of the neighbor.
regular-expression
Specifies a regular expression in the display output on which to filter.
name
Name of an AS-path filter or regular expression.
nexthop
Specifies the configured next hop.
reachable
Specifies reachable next hops.
unreachable
Specifies unreachable next hops.
peer-group peer-group-name
Specifies a peer group.
summary
Displays summarized information.
Modes

User EXEC mode

Examples

The following example shows how to display BGP4 information for a VRF instance. 

device> show ip bgp vrf red
History
Parent topic: Show Commands