copy flash scp

Uploads a copy of an OS image file from a FastIron device’s primary or secondary flash memory to an SCP server. The syntax for copying an image between two devices under test (DUTs) is different from the syntax for uploading from an ICX device to a Linux or a Windows server.
Syntax

Syntax for copying an image between two DUTs:

copy flash scp { ipv4-address- | ipv4-hostname- | ipv6 { ipv6-address-prefix/prefix-length | ipv6-hostname- } outgoing-interface { ethernet stackid/slot/port | ve ve-number } } [ public-key { dsa | rsa } ] [ remote-port ] remote-filename { flash:primary | secondary }

Syntax for uploading from an ICX device to a Linux or a Windows server:

copy flash scp { ipv4-address- | ipv4-hostname- | ipv6 { ipv6-address-prefix/prefix-length | ipv6-hostname- } outgoing-interface { ethernet stackid/slot/port | ve ve-number } } [ public-key { dsa | rsa } ] [ remote-port ] remote-filename { primary | secondary }
Parameters
ipv4-address-
Specifies the IPV4 address of the SCP server.
ipv4-hostname-
Specifies the IP hostname of the SCP server.
ipv6
Specifies the IPV6 address method for SCP file transfer.
ipv6-address-prefix/prefix-length
Specifies the IPV6 address of the SCP server. You must specify this address in hexadecimal using 16-bit values between colons, as documented in RFC 2373.
ipv6-hostname-
Specifies the IPv6 hostname of the SCP server.
outgoing-interface
Specifies the interface to be used to reach the remote host.
ethernet stackid/slot/port
Configures an Ethernet interface as the outgoing interface.
ve ve-number
Configures a virtual interface (VE) as the outgoing interface.
public-key
Specifies the type of public key authentication to use for the connection, either digital signature algorithm (DSA) or Rivest, Shamir, and Adelman (RSA) . If you do not configure this parameter, the default authentication type is password.
dsa
Specifies DSA as the public key authentication.
rsa
Specifies RSA as the public key authentication.
remote-port
Specifies the remote port number for the TCP connection.
remote-filename
Specifies the name of the file in the SCP server that is be transferred. You can specify up to 127 characters for the filename.
flash:primary
Specifies the binary image in primary flash memory. Configure the flash:primary keyword when transferring files between DUTs,. See the usage note regarding using this keyword when transferring files between DUTs.
primary
Specifies the binary image in primary flash memory.
secondary
Specifies the binary image in secondary flash memory.
Modes

Privileged EXEC mode

Usage Guidelines

You are prompted for username and password when you configure this command.

Note: When transferring files between DUTs, you should configure the flash:primary keyword instead of the primary keyword because the SCP server does not support remote-filename aliases.

Examples

The following example uploads a copy of an OS image file from the primary flash memory on an ICX device to the SCP server: 

device# copy flash scp 10.20.1.1 SPS08040-scp.bin primary
device# copy flash scp 10.20.1.1 SPS08040-scp.bin secondary

The following example uploads a copy of an OS image file from the primary flash memory on an ICX device to an SCP server with the IP address of 172.26.51.180 : 

device# copy flash scp 172.26.51.180 filename primary

The following example specifies that the SCP connection is established using SSH public key authentication: 

device# copy flash scp 172.26.51.180 public-key dsa filename primary
History
Release version Command history
08.0.20 This command was introduced.
Parent topic: Commands C