manager disconnect
The switch has a connection with SmartZone.
Privileged EXEC mode
Beginning with SmartZone release 5.0, SmartZone can be used to monitor and manage ICX switches. An ICX switch identifies SmartZone and initiates a connection based on the SmartZone IP addresses configured on the switch or discovered through DHCP Option 43.
Once the connection has been disconnected, the switch will initiate a new connection with SmartZone using the IP address list that is available and in the order that the IP address list is configured.
Ruckus recommends that the
manager disconnect command be entered only from the local terminal or using an SSH or a direct Telnet
connection (not through the reverse SSH tunnel).