lldp advertise system-capabilities
lldp advertise system-capabilities
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
no lldp advertise system-capabilities
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
The system capabilities are automatically advertised when Link Layer Discovery Protocol (LLDP) is enabled on a global basis.
Global configuration mode
System capabilities are based on the type of software image in use (Layer 2 switch or Layer 3 router). The enabled capabilities are the same as the available capabilities, except that when using a router image (base or full Layer 3), if the global route-only feature is turned on, the bridge capability is not included, since no bridging occurs.
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will have no effect.