radius-server enable

Configures the device to allow RADIUS server management access only to clients connected to ports within the port-based VLAN.
Syntax
radius-server enable vlan vlan-number
no radius-server enable vlan vlan-number
Command Default

By default, access is allowed on all ports.

Parameters
vlan vlan-number
Configures access only to clients connected to ports within the VLAN.
Modes

Global configuration mode

Usage Guidelines

The no form of the command removes the restriction.

You can restrict management access to a RUCKUS device to ports within a specific port-based VLAN. VLAN-based access control works in conjunction with other access control methods. Clients connected to ports that are not in the VLAN are denied management access.

Examples

The following example shows how to allow RADIUS server access only to clients in a specific VLAN. 

device(config)# radius-server enable vlan 10
Parent topic: Commands O, P, Q, R, and Sa through Sh