Managing BGP EVPN Profiles

The controller provides options for you to edit or delete BGP EVPN profiles at the switch-group level.

  1. From the main menu, navigate to Network > Wired > Switches.
    The Switches window is displayed.
  2. In the left navigation pane, select a switch group.
  3. Click the Configuration tab.
  4. Under the Configuration tab, click the BGP EVPN button.
    The BGP EVPN profile page is displayed.

    Configuration - BGP EVPN

  5. (Optional) To delete a BGP EVPN profile, select the profile in the list and click .
    The controller removes all BGP EVPN settings from the ICX switches in the switch group and deletes the BGP EVPN profile.

    Deleting a BGP EVPN Profile

  6. (Optional) To edit an existing BGP EVPN profile, select the profile in the list and click Next.
    The selected BGP EVPN profile page is displayed.

    Example BGP EVPN Profile

    1. Edit the fields in any of the sections. Refer to Creating a BGP EVPN Route Reflector Profile and Creating a BGP EVPN Full Mesh Profile for descriptions of the individual fields.
    2. Click OK to save and apply the changes.

      The controller compares the local configuration on the ICX switches in the switch group with the changes in the BGP EVPN profile, and deploys the appropriate ICX CLI commands to the target ICX switches to deploy the changes.

      Note: If you apply BGP EVPN or VXLAN configuration changes to any of the ICX switches using other methods outside of the SmartZone controller (for example, CLI, SNMP, WebUI, or RESTConf), the controller will sync the data to the database using its local sync mechanism.

Parent topic: BGP EVPN