Configuring Access Points

Access Points have the flexibility to receive individual-specific configurations when necessary, overriding group and zone configurations. Configure parameters such as general information, band-spectrum usage, model specific and advanced options. Refer to the Access Point and Zone Configuration Options to find out which configurations of the zone level can be overridden at the AP individual level.

After an access point registers successfully with the controller, you can update its configuration by completing the following steps.

  1. From the list, select the AP that you want to configure and click Configure. The Edit AP page is displayed.
  2. You can edit the parameters as explained in Access Point and Zone Configuration Options.
  3. Click OK.

    Note:
  • You can also move the location of an AP or delete an AP. To do so, select the AP from the list and click Move or Delete as required.
  • A maximum of 50 APs in a specific group can be moved from one zone to another by using an API command. APs that fail to move return and error code indicating the failure and the AP count. Select Administration > Help > REST API to refer to the API command. In the SmartZone 300 Public API Reference Guide, refer to Access Point Configuration > Move multiple APs.

For more information on configuring APs, see Access Point and Zone Configuration Options.

Parent topic: Configuring Access Points