Enabling LACP Support for an AP

Perform the following procedure to enable the LACP support for an AP.
  1. From the main menu, go to Network > Wireless, select Access Points. The Access Point page is displayed.
  2. Select an AP group from the zone.
  3. Select an AP and click Configure. The Edit AP page opens.
  4. Locate and toggle the Model Specific Options to ON for Model Specific Control.
  5. Under General Options, enable LACP.
    Note: By default, LACP is disabled.
    Note: To support the LACP and LAG feature on RUCKUS APs, ensure that the correct PoE mode is selected to bring up LAN1,2 ports. For example, PoE-at+ for R720, PoE-at for R710. The LACP and LAG UL throughput is limited to around 1Gbps.
  6. Click OK.
    Note: When you enable or disable LACP, the corresponding status is updated in the General tab of the Access Points page.
Parent topic: Link Aggregration Protocol (LACP)