AP Status

In this section:

1. AP Status
   The real-time status of the Access Points are classified as follows:
2. SCI Thresholds for each AP
   The following are the thresholds from SCI for each AP.
3. Monitoring the Network
   When you select a System, Domain, Zone, or AP Group from the hierarchy tree, respective contextual tabs appear at the bottom of the page.
4. Viewing Managed Access Points
   After an access point registers successfully with the controller, it appears on the Access Points page, along with other managed access points.
5. Monitoring Access Points
   When you select an AP from the list, contextual tabs appear at the bottom of the page.
6. Viewing General AP Information
7. Viewing LLDP Neighbors
   You can view basic information, and detailed information about the LLDP neighbor of an AP form the controller interface.

   SZ 5.1 update - reused across platforms
8. Tagging Critical APs
   A critical AP is an AP that exceeds the daily traffic threshold (sum of uplink and downlink) data bytes configured on the controller web interface.
9. Working with Maps
   Importing floorplan maps into SmartZone allows you to further customize the information displayed on the Dashboard and Access Points pages, and monitor your APs, zones, groups, clients and traffic statistics all within the world map view on the Dashboard.
10. Viewing AP Health Indicators
    You can monitor the AP performance and connection failures at the domain, zone, AP group, or specific AP level from the Health tab on the Access Points page. For all health metrics, the maximum, average, and minimum values are displayed for the AP group, followed by the specific value for each of the top APs. You can customize the number of individual APs displayed for the selected domain, zone, and AP group.
11. Health
12. Viewing AP Performance
    3.6 Update
13. Viewing AP Connection Failures
    3.6 Update
14. AP Traffic Indicators
15. Neighbor APs
16. Reports
17. External Syslog Server