Create session response failed

Note: This alarm is supported on the SmartZone 300 controllers only. This alarm is not applicable for vSZ-H.

Create session response failed alarm

Alarm

Create session response failed

Alarm Type

createSessionResponseFailed

Alarm Code

1954

Severity

Major

Aggregation Policy

From the event code 1954 an alarm is raised for every event. A single event triggers a single alarm.

Attribute

“mvnoId”=”12” “wlanId”=”1” “zoneId”=”10”  “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff” “srcProcess”=”aut” “realm”= ”wlan.mnc080.mcc405.3gppnetwork.org" “gtpcIp”=”5.5.5.5” “pgwIp”=”1.1.1.1” "SCGMgmtIp"="2.2.2.2" “ueMacAddr”=”aa:bb:cc:gg:hh:ii” “ueImsi”=”12345” “ueMsisdn”=”98787” “apn”=”ruckus.com” “cause”=”<reason for failure>”

Displayed on the web interface

[{srcProcess}] Create Session response from PDN GW with IP [{pgwIp}] on {produce.short.name} [{SCGMgmtIp}] failed, for UE with username [{ueImsi}@{realm}] because [{cause}]

Description

This alarm is triggered when create session response from PDN GW fails as per the specified cause.

Recommended Actions

Download the SM log to check the cause of the error.