From the event code 807 an alarm is raised for every event. A single event triggers
a single alarm.
Auto Clearance
The alarm code is auto cleared with the event code 808.
Attribute
“clusterName”=”xxx”
Displayed on the web interface
Cluster [{clusterName}] is in maintenance state
Description
This alarm is triggered when a cluster is in a maintenance state.
Recommended Actions
Possible causes:
The entire system backup is in process.
In a two-node cluster, the remove-node process is working.
For any other cause, please send the complete
system log files (stored in the path - /opt/
ruckuswireless/controller/log/system to RUCKUS
support for analysis.