AP NAT failure

AP NAT failure alarm

Alarm

AP cable modem interface down NAT failure detected by controller due to three (3) consecutive NAT gateway APs are down

Alarm Type

apNATFailureDetectedbySZ

Alarm Code

346

Severity

Major

Aggregation Policy

From the event code 346 an alarm is raised for every event. A single event triggers a single alarm.

Attribute

”apMac1”=“xx:xx:xx:xx:xx:xx”, ”apMac2”=“xx:xx:xx:xx:xx:xx”, ”apMac3”=“xx:xx:xx:xx:xx:xx”

Displayed on the web interface

NAT failure detected by SZ since three (3) consecutive NAT gateway IPs are down AP1=[{apMac1}] AP2=[{apMac2}] AP3=[{apMac3}] (All consecutive NAT APs are down in case of less than 3 NAT Gateway APs configured). The NAT traffic for some of the clients may get affected for the respective VLANs.

Description

This alarm is triggered when the controller detects three (3) consecutive failures of NAT server APs.