Status Mode LEDs

You must press the status mode selection button to select the status mode to display the corresponding status on the individual port status LED. Pressing the button once shifts to the next mode in the following sequence:

  1. Port link status mode (STAT) (default mode)
  2. Port speed status mode (SPD)
  3. Member ID status mode (ID)
  4. USB status mode (USB)
  5. PoE status mode (PoE)
Note: When in USB mode, pressing the status mode selection button for more than 5 seconds initiates the copy files function such as the image/manifest file, configuration file, and Show Tech (supportsave) from the device to the USB.

In this section:

  1. Port Link Status Mode (STAT) LED
    The port link status mode (STAT) LED displays the link status and activities of each port. Each unit within the stack will also display the local port status.
  2. Port Speed Status Mode (SPD) LED
    Port speed status (SPD) mode displays the speed setting of each downlink and uplink port (including modules).
  3. Member ID Status Mode (ID) LED
    The member ID status mode (ID) LEDs display the Stack ID or Switch Port Extender (SPX) port extender (PE)
  4. USB Status Mode LED
    Refer to the following tables to interpret the USB status mode LED.
  5. PoE Status Mode LED (Not Applicable for non-PoE)
    Power over Ethernet (PoE) status mode displays the PoE status of each downlink port. Refer to the following table to interpret the Power over Ethernet (PoE) status LED.
Parent topic: System LEDs