PoE Status Mode LED (Not Applicable for non-PoE)

Power over Ethernet (PoE) status mode displays the PoE status of each downlink port. Refer to the following table to interpret the Power over Ethernet (PoE) status LED.

PoE Status Mode LED During Normal Operation

LED Color Status of Hardware Recommended Action
Off Port is not providing PoE power for reasons such as:
  • PoE is disabled.
  • There is no device connected to the port.
  • The device connected to the port is not a PoE device.
 None.
Steady green PoE/PoE+/PoH is on. Port is providing power. None.
Flashing amber PoE is off due to a fault or not enough PoE power budget set for the port. None.
Parent topic: Status Mode LEDs