Viewing Reassigned VLAN IDs for Reserved VLANs

To view the assigned VLAN IDs for reserved VLANs 4090, 4091 and 4092, use the show reserved-vlan-map command. The reassigned VLAN IDs also display in the output of the show running-config and show config commands.

The following shows example output for the show reserved-vlan-map command. 

device# show reserved-vlan-map
Reserved Purpose           Default   Re-assign   Current
 Tunnel VLAN               4090       4090         4090
 CPU VLAN                  4091       4091         4091 
 All Ports VLAN            4092       4092         4092

The following table defines the fields in the output of the show reserved-vlan-map command.

Output of the show reserved-vlan-map Command

Field Description
Reserved Purpose Describes for what the VLAN is reserved. Note that the description is for RUCKUS internal VLAN management.
Default The default VLAN ID of the reserved VLAN.
Re-assign The VLAN ID to which the reserved VLAN was reassigned.1
Current The current VLAN ID for the reserved VLAN.1
  1. If you reassign a reserved VLAN without saving the configuration and reloading the software, the reassigned VLAN ID will display in the Re-assign column. However, the previously configured or default VLAN ID will display in the Current column until the configuration is saved and the device reloaded. ↩
Parent topic: VLANs