Commands for Configuring Aggregated VLANs on Device D

Device D is at the other end of path and separates the channels back into individual VLANs. The tag profile must be the same as the tag profile configured on the other core device (Device C). In addition, VLAN aggregation also must be enabled.

deviceD(config)# tag-profile 9100
deviceD(config)# aggregated-vlan
deviceD(config)# vlan 910 by port
deviceD(config-vlan-910)# tagged ethernet 1/1/17
deviceD(config-vlan-910)# untagged ethernet 1/1/11 to 1/1/12
deviceD(config-vlan-910)# exit
deviceD(config)# interface ethernet 1/1/11 to 1/1/12
deviceD(config-mif-1/1/11-1/1/12)# tag-profile enable
deviceD(config-mif-1/1/11-1/1/12)# exit
deviceD(config)# write memory