Displaying Anycast Gateway VXLAN Information

You can use a show command to view information about anycast gateway with VXLAN configurations.
Use the following command to view anycast gateway with VXLAN information. For more detailed information on this command, refer to the RUCKUS FastIron Command Reference Guide.
  1. Enter the show ip interface ve command to display information about IP configurations for a specified VE interface, including anycast gateway configurations.
    device> show ip interface ve 100

Interface Ve 100
  members: ethe 1/1/19 ethe 1/1/31 ethe 1/1/35 ethe 1/1/48 ethe 2/1/14 ethe 2/1/23 lag lg1 lag lg10
  active: ethe 1/1/35 ethe 1/1/48
  port enabled
  port state: UP
  ip address: 100.1.1.1         subnet mask: 255.255.255.0
  Port belongs to VRF: overlay-vrf
  encapsulation: ETHERNET, mtu: 9216, metric: 1
  directed-broadcast-forwarding: disabled
  ICMP redirect: enabled
  proxy-arp: disabled
  ip arp-age:  10 minutes
  no delay in notification
  No Helper Addresses are configured.
  No inbound ip access-list is set
  No outgoing ip access-list is set
  Anycast gateway: enabled
  Anycast gateway mac : 0002.1111.1110
    In this example, the anycast gateway feature is enabled for the VE interface. A MAC address of 0002.1111.1110 is assigned to the anycast gateway.
Parent topic: Anycast Gateway with VXLAN