Scenario - 3: Configuring MRP for Topology Group

To configure an MRP ring between device 1 (mrp-master) and device 2 (mrp-member) for a topology group, complete the following steps.
  1. Complete the MRP configuration (ring 2) between device 1 and device 2 as specified in Configuring Metro Ring Protocol..
  2. Configure multiple VLANs as per the requirement and add the same ring interfaces to the VLAN.
    DUT1(config)# vlan 11 to 20
DUT1(config-mvlan-11-20)# tagged ethernet 2/2/2 ethernet 2/2/3
  3. Configure a topology-group with an MRP-configured VLAN as master VLAN and member VLAN as other VLANs where you want to run MRP.
    DUT1(config)# topology-group 1
DUT1(config-topo-group-1)# master-vlan 2
DUT1(config-topo-group-1)# member-vlan 11 to 20
  4. Verify MRP configuration.
    device(config-topo-group-1)# show running-config vlan 2
vlan 2 by port
tagged ethe 2/2/2 to 2/2/3
metro-ring 2
master
ring-interfaces ethernet 2/2/2 ethernet 2/2/3
enable
preforwarding-time 600
hello-time 300
name mrp-node1
!
!
  5. Perform the similar configurations on device 2. 
    DUT2(config)# vlan 2
DUT2(config-vlan-2)# tagged ethernet 1/2/1 ethernet 1/2/2
Added tagged port(s) ethe 1/2/1 to 1/2/2 to port-vlan 2.
DUT2(config-vlan-2)# metro-ring 2
DUT1(config-vlan-2-mrp-2)# name mrp-node2
DUT2(config-vlan-2-mrp-2)# ring-interfaces ethernet 1/2/1 ethernet 1/2/2
DUT2(config-vlan-2-mrp-2)# enable
DUT2(config-vlan-2-mrp-2)# exit
DUT2(config-vlan-2)# vlan 11 to 20
DUT2(config-mvlan-11-20)# tagged ethernet 1/2/1 ethernet 1/2/2
DUT2(config-mvlan-11-20)# exit
DUT2(config)#topology-group 1
DUT2(config-topo-group-1)# master-vlan 2
DUT2(config-topo-group-1)# member-vlan 11 to 20
Parent topic: Metro Ring Protocol Configuration