Displaying BGP EVPN Information

You can use various show commands to view information about BGP EVPN.
Use one of the following commands to view BGP EVPN information. Using these commands is optional and they can be entered in any order. For more information on the full list of show bgp evpn commands, refer to the RUCKUS FastIron Command Reference Guide.
  1. Enter the show ip bgp evpn attribute-entries command to display information about AS-path attribute entries for the L2VPN EVPN address family. 
    device> show ip bgp evpn attribute-entries

 Total number of BGP Attribute Entries: 14
1       Next Hop  : 2.2.2.8           MED      :0               Origin:IGP
        Originator:0.0.0.0            Cluster List:None
        Aggregator:AS Number :0       Router-ID:0.0.0.0         Atomic:None
        Local Pref:100                Communities:Internet
        Extended Community: RT 1000:30 Bgp-Encap: Tunnel-Type: 8
        AS Path   : (length 0)
        AsPathLen: 0  AsNum: 0, SegmentNum: 0, Neighboring As: 0, Source As 0
        Address: 0xd777a4e8  Hash:3730 (0x1000000)
        Links: 0x0, 0x0
        Reference Counts: 1:0:1, Magic: 1
2       Next Hop  : 2.2.2.8            MED      :0               Origin:IGP
        Originator:0.0.0.0            Cluster List:None
        Aggregator:AS Number :0       Router-ID:0.0.0.0          Atomic:None
        Local Pref:100                Communities:Internet
        Extended Community: RT 1000:31 Bgp-Encap: Tunnel-Type: 8
        AS Path   : (length 0)
        AsPathLen: 0  AsNum: 0, SegmentNum: 0, Neighboring As: 0, Source As 0
        Address: 0xd777a553  Hash:3731 (0x1000000)
        Links: 0x0, 0x0
        Reference Counts: 1:0:1, Magic: 2
  2. Enter the show ip bgp evpn neighbors command to display configuration information and statistics for BGP EVPN neighbors. 
    device> show ip bgp evpn neighbors

    Total number of BGP Neighbors:1
1   IP Address: 1.1.1.11, AS: 1000 (IBGP), RouterID: 1.1.1.11, VRF: default-vrf
    State: ESTABLISHED, Time: 0h2m30s, KeepAliveTime: 60, HoldTime: 180
       KeepAliveTimer Expire in 3 seconds, HoldTimer Expire in 140 seconds
    Minimal Route Advertisement Interval: 0 seconds
       UpdateSource: Loopback 1
       RefreshCapability: Received
    Address Family : L2VPN EVPN
       SendCommunity: yes
       SendExtenedCommunity: yes
    Messages:    Open    Update  KeepAlive Notification Refresh-Req
       Sent    : 1       2       3         0            0
       Received: 1       12      3         0            0
    Last Update Time: NLRI       Withdraw          NLRI       Withdraw
                  Tx: 0h2m30s    ---           Rx: 0h2m30s    ---
    Last Connection Reset Reason:Unknown
    Notification Sent:     Unspecified
    Notification Received: Unspecified
    Neighbor NLRI Negotiation:
      Peer Negotiated IPV4  unicast  capability
      Peer Negotiated L2VPN EVPN address family
      Peer configured for IPV4 unicast  Routes
      Peer configured for L2VPN EVPN address family
    Neighbor AS4 Capability Negotiation:
    Outbound Policy Group:
       ID: 2, Use Count: 1
    TCP Connection state: ESTABLISHED
     Maximum segment size: 1436
    TTL check: value: 0
       Byte Sent:   322, Received: 1394
       Local host:  1.1.1.8, Local  Port: 179
       Remote host: 1.1.1.11, Remote Port: 8107
       ISentSeq:   44010496  SendNext:   44010819  TotUnAck:          0
       TotSent:         323  ReTrans:           0  UnAckSeq:   44010819
       IRcvSeq:  1849175076  RcvNext:  1849176471  SendWnd:       16384
       TotalRcv:       1395  DupliRcv:          0  RcvWnd:        16384
       SendQue:           0  RcvQue:            0  CngstWnd:       1436
  3. Enter the show ip bgp evpn routes command to display information for the routes in the BGP route table for the L2VPN EVPN address family.
    device> show ip bgp evpn routes

Total number of BGP EVPN Routes: 5 (R: 3, L: 2)
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
       E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
       S:SUPPRESSED F:FILTERED s:STALE
       Prefix             Next Hop        MED        LocPrf     Weight Status
Route Distinguisher: 2.2.2.8:30
1      [3]:[0]:[32]:[2.2.2.8]/72
                          2.2.2.8         0          100        0      BL
         AS_PATH: Not Applicable
2      [3]:[0]:[32]:[2.2.2.11]/72
                          2.2.2.11        0          100        0      BI
         AS_PATH: Not Applicable
Route Distinguisher: 2.2.2.8:31
3      [2]:[0]:[48]:[0001.0001.0001]/128
                          2.2.2.11        0          100        0      BI
         AS_PATH: Not Applicable
4      [3]:[0]:[32]:[2.2.2.8]/72
                          2.2.2.8         0          100        0      BL
         AS_PATH: Not Applicable
5      [3]:[0]:[32]:[2.2.2.11]/72
                          2.2.2.11        0          100        0      BI
         AS_PATH: Not Applicable
  4. Enter the show ip bgp evpn routes mac command to display BGP EVPN information for MAC routes. 
    device> show ip bgp evpn routes mac

Searching for matching routes, use ^C to quit...
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
       E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
       S:SUPPRESSED F:FILTERED s:STALE
       Prefix             Next Hop        MED        LocPrf     Weight Status
Route Distinguisher: 2.2.2.8:31
1      [2]:[0]:[48]:[0001.0001.0001]/128
                          2.2.2.11        0          100        0      BI
         AS_PATH: Not Applicable
  5. Enter the show ip bgp evpn routes imet command to display BGP EVPN information for P-Multicast Service Interface Tunnel (PMSI Tunnel) tunnel path attributes associated with a route.
    device> show ip bgp evpn routes imet

Searching for matching routes, use ^C to quit...
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
       E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
       S:SUPPRESSED F:FILTERED s:STALE
       Prefix             Next Hop        MED        LocPrf     Weight Status
Route Distinguisher: 2.2.2.8:30
1      [3]:[0]:[32]:[2.2.2.8]/72
                          2.2.2.8         0          100        0      BL
         AS_PATH: Not Applicable
2      [3]:[0]:[32]:[2.2.2.11]/72
                          2.2.2.11        0          100        0      BI
         AS_PATH: Not Applicable
Route Distinguisher: 2.2.2.8:31
3      [3]:[0]:[32]:[2.2.2.8]/72
                          2.2.2.8         0          100        0      BL
         AS_PATH: Not Applicable
4      [3]:[0]:[32]:[2.2.2.11]/72
                          2.2.2.11        0          100        0      BI
         AS_PATH: Not Applicable
  6. Enter the show ip bgp evpn routes detail command to display detailed information for the routes in the BGP route table for the L2VPN EVPN address family. 
    device> show ip bgp evpn routes detail

Total number of BGP EVPN Routes: 5 (R: 3, L: 2)
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
       E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
       S:SUPPRESSED F:FILTERED s:STALE
Route Distinguisher: 2.2.2.8:30
1       Prefix: [3]:[0]:[32]:[2.2.2.8]/72,  Status: BL,  Age: 18h12m30s
         NEXT_HOP: 2.2.2.8, Learned from Peer: Local Router
          LOCAL_PREF: 100,  MED: 0,  ORIGIN: igp,  Weight: 0
                  AS_PATH: Not Applicable
           PMSI Tunnel Type: Ingress-Replication, L2VNI: 10030, Endpoint: 2.2.2.8
            Extended Community: RT 1000:30 Bgp-Encap: Tunnel-Type: 8
            Adj_RIB_out count: 1,  Admin distance 1
2       Prefix: [3]:[0]:[32]:[2.2.2.11]/72,  Status: BI,  Age: 18h11m14s
         NEXT_HOP: 2.2.2.11, Learned from Peer: 1.1.1.11 (1000)
          LOCAL_PREF: 100,  MED: 0,  ORIGIN: igp,  Weight: 0
                  AS_PATH: Not Applicable
           PMSI Tunnel Type: Ingress-Replication, L2VNI: 10030, Endpoint: 2.2.2.11
            Extended Community: RT 1000:30 Bgp-Encap: Tunnel-Type: 8
Route Distinguisher: 2.2.2.8:31
3       Prefix: [2]:[0]:[48]:[0001.0001.0001]/128,  Status: BI,  Age: 18h11m14s
         NEXT_HOP: 2.2.2.11, Learned from Peer: 1.1.1.11 (1000)
          LOCAL_PREF: 100,  MED: 0,  ORIGIN: igp,  Weight: 0
                  AS_PATH: Not Applicable
           L2VNI: 10031
            Extended Community: RT 1000:31 Bgp-Encap: Tunnel-Type: 8 MAC-Mobility: Static-flag: 1 Seq-no: 0
4       Prefix: [3]:[0]:[32]:[2.2.2.8]/72,  Status: BL,  Age: 18h12m30s
         NEXT_HOP: 2.2.2.8, Learned from Peer: Local Router
          LOCAL_PREF: 100,  MED: 0,  ORIGIN: igp,  Weight: 0
                  AS_PATH: Not Applicable
           PMSI Tunnel Type: Ingress-Replication, L2VNI: 10031, Endpoint: 2.2.2.8
            Extended Community: RT 1000:31 Bgp-Encap: Tunnel-Type: 8
            Adj_RIB_out count: 1,  Admin distance 1
5       Prefix: [3]:[0]:[32]:[2.2.2.11]/72,  Status: BI,  Age: 18h11m14s
         NEXT_HOP: 2.2.2.11, Learned from Peer: 1.1.1.11 (1000)
          LOCAL_PREF: 100,  MED: 0,  ORIGIN: igp,  Weight: 0
                  AS_PATH: Not Applicable
           PMSI Tunnel Type: Ingress-Replication, L2VNI: 10031, Endpoint: 2.2.2.11
            Extended Community: RT 1000:31 Bgp-Encap: Tunnel-Type:
  7. Enter the show ip bgp evpn summary command to display summarized information for the L2VPN EVPN address family. 
    device> show ip bgp evpn summary
  BGP Summary
  Router ID: 1.1.1.8   Local AS Number: 1000
  Confederation Identifier: not configured
  Confederation Peers:
  Maximum Number of IP ECMP Paths Supported for Load Sharing: 1
  Number of Neighbors Configured: 1, UP: 1
  Number of Routes Installed: 17, Uses 2210 bytes
  Number of Routes Advertising to All Neighbors: 2 (2 entries), Uses 192 bytes
  Number of Attribute Entries Installed: 14, Uses 1386 bytes
  Neighbor Address  AS#         State   Time          Rt:Accepted Filtered Sent     ToSend
  1.1.1.11          1000        ESTAB   0h16m37s      15          0        2        0
  8. Enter the show l2vpn evpn evi all command to display information for all Layer 2 EVPN instances (EVIs).
    device> show l2vpn evpn evi all
Total number of Evpn Instances: 1
EVI         State  VNI       Vlan  Tunnel-Ip        RT-export        RT-import        RD
100         UP     1000      10    1.1.1.1          10000:1000       10000:1000       1.1.1.1:10
200         UP     2000      20    1.1.1.1          10000:2000       10000:2000       1.1.1.1:20
  9. Enter the show l2vpn evpn evi command, and specify an EVI, to display information for the specified EVI. 
    device> show l2vpn evpn evi 100  
     
RD               : 159.159.159.159:100(auto)
RT import list   : 100:100 
RT export        : 100:100
Service model    : vlan-based 
State            : UP
Replication Type : Ingress-replication
Encapsulation    :  
ARP suppression  : Yes
Unknown unicast suppress: No
Overlay          : loopback 
L2 VNI           : 100
L3 VNI           : None
Tunnel Ip        : 159.159.159.159
Mac move limit   : 5
Mac move expiry  : 180
MAC re-advertise : No
  10. Enter the show l2vpn evpn evi command with the detail keyword, and specify an EVI, to display detailed information for the EVI. 
    device> show l2vpn evpn evi 100 detail 
RD               : 159.159.159.159:100(auto)
RT import list   : 100:100 
RT export        : 100:100
Service model    : vlan-based 
State            : UP
BGP              : Advertised
Replication Type : Ingress-replication
BUM Protocol     : BGP
Encapsulation    :  
ARP suppression  : Yes
Unknown unicast suppress: No
Overlay          : loopback 
Tunnel Ip        : 159.159.159.159
Mac move limit   : 5
Mac move expiry  : 180
MAC re-advertise : No
Debug info flag  : Off 
Debug itc flag   : Off 
Debug trace flag : Off 
Debug error flag : Off 
L2 VNI           : 100
L3 VNI           : None
VRF              : Tenant VRF
  11. Enter the show l2vpn evpn mac-ip-table vlan command, and specify a VLAN, to display information for an EVPN MAC IP table for the VLAN.
    device> show l2vpn evpn mac-ip-table vlan 10

No.   IP Address         MAC Address    Flags     Port              VLAN
1     192.168.10.100     d4c1.9e17.8d27 DL        e 1/1/1            10    
2     192.168.10.200     d4c1.9e17.91f7 DR        VxL-200.1.1.1      10  
Flags: D (Dynamic) S (Static) L(Local) R(Remote) Ad(Advertised)
Parent topic: BGP EVPN VXLAN