The following table contains the global objects
that apply to Virtual Router Redundancy Protocol (VRRP), Virtual Router Redundancy
Protocol Extended (VRRP-E), and Virtual Switch Redundancy Protocol (VSRP).
Note: ICX 7150-ES and ICX 8100 devices do
not support VRRP and VRRP-E.
Name, OID, and syntax
Access
Description
snVrrpIfStateChangeTrap
1.3.6.1.4.1.1991.1.2.12.1.2
Syntax: Integer
Read-write
Indicates if the SNMP agent process has been enabled to generate VRRP interface state
change traps:
disabled(0)
enabled(1)
Default: enabled(1)
Note: The standard MIB “vrrpNotificationCntl” will work exactly the same as the Proprietary
MIB "snVrrpIfStateChangeTrap”.
snVrrpIfMaxNumVridPerIntf
1.3.6.1.4.1.1991.1.2.12.1.3
Syntax: Integer
Read-only
Indicates the maximum number of VRID per interface.
snVrrpIfMaxNumVridPerSystem
1.3.6.1.4.1.1991.1.2.12.1.4
Syntax: Integer
Read-only
Indicates the maximum number of VRID per system.
snVrrpClearVrrpStat
1.3.6.1.4.1.1991.1.2.12.1.5
Syntax: Integer
Read-write
Clear VRRP statistics command.
snVrrpGroupOperModeVrrpextended
1.3.6.1.4.1.1991.1.2.12.1.6
Syntax: Integer
The VRRP_extended is configured on this system is
either enabled or disabled. The default is disabled mode.