Trap receiver table

The trap receiver table allows you to configure trap receivers on IPv4 and IPv6 devices to send the traps.

Note: The snAgTrpRcvrTable is deprecated and replaced by fdryTrapReceiverTable.

Name, OID, and syntax	Description
fdryTrapReceiverTable 1.3.6.1.4.1.1991.1.1.10.1.1.1	The trap receiver table.
fdryTrapReceiverIndex 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.1 Syntax: Unsigned32	The index to the Trap Receiver Table.
fdryTrapReceiverAddrType 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.2 Syntax: InetAddressType	Trap Receiver IP address Type. Supported address types are IPv4(1) and IPv6(2)
fdryTrapReceiverAddr 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.3 Syntax: InetAddress	Trap Receiver IP address.
fdryTrapReceiverCommunityOrSecurityName 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.4 Syntax: Octet String	Community string to use. In case of USM (SNMPv3) security model, this object is used to provide the security name.
fdryTrapReceiverUDPPort 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.5 Syntax: Integer32	UDP port number of the trap receiver.
fdryTrapReceiverSecurityModel 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.6 Syntax: SecurityModel	Version of trap format to be used.
fdryTrapReceiverSecurityLevel 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.7 Syntax: Securitylevel	Used for USM (SNMPv3) security model to specify the level of security. The security name is provided by fdryTrapReceiverCommunityOrSecurityName.
fdryTrapReceiverRowStatus 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.8 Syntax: RowStatus	This variable is used to create, modify, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object.