| snPortCARTable 1.3.6.1.4.1.1991.1.1.3.16.1.1
|
None
|
The CAR port table.
|
| snPortCARifIndex 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.1 Syntax: Integer
|
Read-only
|
Shows the ifIndex value for this rate limit entry.
|
| snPortCARDirection 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.2 Syntax: Integer
|
Read-only
|
Specifies the transmission direction of the rate-limit object:
- input(0) - For inbound traffic.
- output(1) - For outbound traffic.
|
| snPortCARRowIndex 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.3 Syntax: Integer
|
Read-only
|
Shows the table index for rate limit objects. Rows are numbered in sequential order.
When a row is added, it is assigned the next sequential number. When a row is deleted,
the row is skipped.
|
| snPortCARType 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.4 Syntax: RateLimitType
|
Read-only
|
Shows the type of traffic to which the rate limit is applied:
- standardAcc(1) - Traffic matches standard access list.
- quickAcc(2) - Traffic matches the rate-limit access list.
- all(3) - All traffic.
|
| snPortCARAccIdx 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.5 Syntax: Integer32
|
Read-only
|
Indicates the index to the access list if the rate limit type is one of the following:
- standardAcc(1) - Traffic matches standard access list.
- quickAcc(2) - Traffic matches the rate-limit access list.
|
| snPortCARRate 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.6 Syntax: Integer32
|
Read-write
|
Shows the committed access rate for the long-term average transmission rate in bits
per second. Traffic that falls under this rate always conforms to this rate.
|
| snPortCARLimit 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.7 Syntax: Integer32
|
Read-write
|
Shows the normal burst size in bytes. Normal burst size is the number of bytes that
are guaranteed to be transported by the network at the average rate under normal conditions
during the committed time interval.
|
| snPortCARExtLimit 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.8 Syntax: Integer32
|
Read-only
|
Shows the extended burst limit in bytes. The extended burst limit determines how large
traffic bursts can be before all the traffic exceeds the rate limit.
|
| snPortCARConformAction 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.9 Syntax: Integer
|
Read-only
|
Indicates what happens to packets when the traffic is within the rate limit:
- continue(1) - Continue to evaluate the subsequent rate limits.
- drop(2) - Drop the packet.
- precedCont(3) - Rewrite the IP precedence and allow it after evaluated by subsequent
rate limits.
- precedXmit(4) - Rewrite the IP precedence and transmit the packet.
- xmit(5) - Transmit the packet.
|
| snPortCARExceedAction 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.10 Syntax: Integer
|
Read-only
|
Indicates what happens to packets when the traffic exceeds the rate limit:
- continue(1) - Continue to evaluate the subsequent rate limits.
- drop(2) - Drop the packet.
- precedCont(3) - Rewrite the IP precedence and allow it after evaluated by subsequent
rate limits.
- precedXmit(4) - Rewrite the IP precedence and transmit the packet.
- xmit(5) - Transmit the packet.
|
| snPortCARStatSwitchedPkts 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.11 Syntax: Counter64
|
Read-only
|
Indicates the number of packets permitted by this rate limit.
|
| snPortCARStatSwitchedBytes 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.12 Syntax: Counter64
|
Read-only
|
Indicates the number of bytes permitted by this interface.
|
| snPortCARStatFilteredPkts 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.13 Syntax: Counter64
|
Read-only
|
Indicates the number of packets that exceeded this rate limit.
|
| snPortCARStatFilteredBytes 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.14 Syntax: Counter64
|
Read-only
|
Indicates the number of bytes that exceeded this rate limit.
|
| snPortCARStatCurBurst 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.15 Syntax: Gauge32
|
Read-only
|
Shows the current burst size of received packets.
|
| snPortCARRowStatus 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.16 Syntax:
RowStatus
|
Read-create |
The variable is used to create new row in the rate
limit table. The supported values are CreateAndGo(4) and
destroy(6). |