| snMetroRingTable 1.3.6.1.4.1.1991.1.1.3.29.2.1
|
None
|
The MRP table.
|
| snMetroRingVlanId 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.1 Syntax: Integer32
|
None
|
Identifies a VLAN that controls the metro ring.
|
| snMetroRingId 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.2 Syntax: Integer32
|
None
|
The metro ring identifier.
|
| snMetroRingConfigState 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.3 Syntax: Integer
|
Read-write
|
The state of the metro ring. The
values are: other(1), enabled(2), disabled(3).
|
| snMetroRingRole 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.4 Syntax: Integer
|
Read-write
|
Shows the metro ring role: - other(1) - None of the cases below.
- master(2) - Device which originates RHP packets.
- member(3) - Device which forwards RHP packets.
|
| snMetroRingHelloTime 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.5 Syntax: Integer32
|
Read-write
|
The time interval to periodically transmit Ring Health Protocol (RHP) in milliseconds.
|
| snMetroRingPreforwardingTime 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.6 Syntax: Integer32
|
Read-write
|
The time interval that a metro ring stays in the preforwarding state before changing
to the forwarding state (in milliseconds).
|
| snMetroRingPort1 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.7 Syntax: InterfaceIndex
|
Read-write
|
The ifIndex value of port 1 to configure into the metro ring.
|
| snMetroRingPort2 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.8 Syntax: InterfaceIndex
|
Read-write
|
The ifIndex value of port 2 to configure into the metro ring.
|
| snMetroRingName 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.9 Syntax: DisplayString
|
Read-write
|
The description of the metro ring.
|
| snMetroRingRowStatus 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.10 Syntax: Integer
|
Read-write
|
Creates and deletes rows in the table, and controls whether they are used. Values
are: - delete(3) - Deletes a row.
- create(4) - Creates a new row.
If the row exists, then a SET with a value of create(4) returns a “bad value” error.
Deleted rows disappear immediately. The following values can be returned on reads: - noSuchName - No such row
- other(1) - Some other cases.
- valid(2) - The row exists and is valid.
|
| snMetroRingOperState 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.11 Syntax: Integer
|
Read-only
|
Shows the metro ring operational state. Valid values: other(1), enabled(2),
disabled(3)
|
| snMetroRingTopoGroupId 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.12 Syntax: Integer32
|
Read-only
|
The ID of the topology group that controls the metro ring.
|
| snMetroRingRHPTransmitted 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.13 Syntax: Counter32
|
Read-only
|
The Ring Health Protocol (RHP) transmitted counter.
|
| snMetroRingRHPReceived 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.14 Syntax: Counter32
|
Read-only
|
The Ring Health Protocol (RHP) received counter.
|
| snMetroRingStateChanged 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.15 Syntax: Counter32
|
Read-only
|
The counter for the number of times the ring state has changed.
|
| snMetroRingTCRBPDUReceived 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.16 Syntax: Counter32
|
Read-only
|
The topology change protocol received counter.
|
| snMetroRingPriPort 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.17 Syntax: InterfaceIndex
|
Read-only
|
The ifIndex value of the primary port.
|
| snMetroRingSecPort 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.18 Syntax: InterfaceIndex
|
Read-only
|
The ifIndex value of the secondary port.
|
| snMetroRingPriPortState 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.19 Syntax: Integer
|
Read-only
|
The state of the metro ring primary port: - other(1) - None of the cases below.
- preforwarding(2) - Port transmits RHP packets; port does not transmit data packets.
- forwarding(3) - Port transmits RHP and data packets.
- blocking(4) - Port receives RHP packets; does not receive data packets.
- disabled(5) - Port is disabled from the metro ring.
|
| snMetroRingSecPortState 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.20 Syntax: Integer
|
Read-only
|
The state of the metro ring secondary port: - other(1) - None of the cases below.
- preforwarding(2) - Port transmits RHP packets; port does not transmit data packets.
- forwarding(3) - Port transmits RHP and data packets.
- blocking(4) - Port receives RHP packets; does not receive data packets.
- disabled(5) - Port is disabled from the metro ring.
|
| snMetroRingPriPortType 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.21 Syntax: Integer
|
Read-only
|
The metro ring primary port type: - other(1) - None of the cases below.
- regular(2) - Port is configured to operate on a single ring.
- tunnel(3) - Port is configured to operate on multiple rings.
|
| snMetroRingSecPortType 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.22 Syntax: Integer
|
Read-only
|
The metro ring secondary port type: - other(1) - None of the cases below.
- regular(2) - Port is configured to operate on a single ring.
- tunnel(3) - Port is configured to operate on multiple rings.
|
| snMetroRingPriPortActivePort 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.23 Syntax: InterfaceIndex
|
Read-only
|
The ifIndex value of the active primary port.
|
| snMetroRingSecPortActivePort 1.3.6.1.4.1.1991.1.1.3.29.2.1.1.24 Syntax: InterfaceIndex
|
Read-only
|
The ifIndex value of the active secondary port.
|