SPX global scalar MIB objects

The following Switch Port Extender (SPX) global scalar objects are supported on the RUCKUS ICX 7150, Brocade ICX 7250, RUCKUS ICX 7450, RUCKUS ICX 7650 or Brocade ICX 7750 devices depending on the role of the CB or PR in an SPX system.

Name, OID, and syntax

Access

Description

brcdSPXGlobalConfigCBState

brcdIp.1.1.3.40.1.1

Syntax: Integer

Read-write

Configures Control Bridge (CB) state for 802.1BR on the global level.

The SET operation is allowed only on the CB device.

  • none - Reserved state
  • enable - 802.1BR is enabled on CB
  • disable - 802.1BR is disabled on CB
brcdSPXGlobalConfigPEState

brcdIp.1.1.3.40.1.2

Syntax: Integer

Read-write

Configures Port Extender (PE) state for 802.1BR on the global level.

The SET operation is allowed only on the PE standalone device.

  • none - Reserved state
  • enable - 802.1BR is enabled on PE
  • disable - 802.1BR is disabled on PE
Note: Enabling or disabling of the PE takes effect once the configuration is saved and the system is reloaded.

brcdSPXGlobalConfigZeroTouchEnable

brcdIp.1.1.3.40.1.3

Syntax: Integer

Read-write

Configures CB Zero Touch for 802.1BR on the global level.

Zero Touch discovers new PE-capable units, assigns them IDs, defines SPX ports or LAGs, and finally converts them to PE mode to join the SPX system.

The SET operation is allowed only on the CB devices.

  • None - Reserved state; Zero touch is not enabled on CB. The default state is none.
  • enabled - Zero touch is enabled on CB.

brcdSPXGlobalConfigZeroTouchDeny

brcdIp.1.1.3.40.1.4

Syntax: Integer

Read-write

Configures CB Zero Touch for 802.1BR on the global level.

Zero Touch discovers new PE-capable units, assigns them IDs, defines SPX ports or LAGs, and finally converts them to PE mode to join the SPX system.

The SET operation is allowed on CB or PE-standalone devices.

  • none - Neutral; receives packets only. The default state is none.
  • deny - Zero Touch is disabled and the device will not be discovered byZero Touch and SPX secure-setup on other CB units.

brcdSPXGlobalConfigAllowPEMovement

brcdIp.1.1.3.40.1.5

Syntax: Integer

Read-write

Configures CB allow PE movement for 802.1BR on the global level.

It allows the user to move the PE unit without changing its unit ID.

The SET operation is allowed only on the CB device or PE-standalone device.

  • none - Reserved state; PE movement state is disable. The default state is none.
  • enabled - PE movement state is enabled on a device.
Parent topic: Switch Port Extender MIB Definition