The Foundry Discovery Protocol (FDP) interface table shows whether or not the FDP
is enabled on a physical interface. You can use the following table to disable or
enable FDP on individual interfaces.
Note:
You cannot disable the Cisco Discovery Protocol (CDP) on individual interfaces.
Name, OID, and syntax
Access
Description
snFDP
1.3.6.1.4.1.1991.1.1.3.20
snFdpMIBObjects
1.3.6.1.4.1.1991.1.1.3.20.1
snFdpInterface
1.3.6.1.4.1.1991.1.1.3.20.1.1
snFdpInterfaceTable
1.3.6.1.4.1.1991.1.1.3.20.1.1.1
None
Status of FDP on the device interfaces.
snFdpInterfaceEntry
1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1
Syntax: FdpInterfaceEntry
None
An entry in the snFdpInterfaceTable, having the status of FDP on an
interface.
snFdpInterfaceIfIndex
1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.1
None
Shows the ifIndex value of the local interface.
snFdpInterfaceFdpEnable
1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.2
Syntax: Integer
Read-write
The flag, whether the RUCKUS Wireless Discovery Protocol is currently running on
this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE).
false(0) - FDP is disabled.
true(1) - FDP is enabled.
Default: true(1)
snFdpInterfaceCdpEnable
1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.3
Syntax: Integer
Read-write
The flag, whether the Cisco Discovery Protocol is currently running on this
interface. It has no effect when CDP is disabled (snCdpGlobalRun = FALSE).