| ospfv3RouterId 1.3.6.1.2.1.191.1.1.1 Syntax:
Ospfv3RouterIdTC
|
Read-only |
A 32-bit unsigned
integer uniquely identifying the router in the Autonomous
System. To ensure uniqueness, this may default to the 32-bit
unsigned integer representation of one of the router's IPv4
interface addresses (if IPv4 is configured on the router). This
object is persistent, and when written, the entity should save
the change to non-volatile storage.
|
| ospfv3AdminStatus 1.3.6.1.2.1.191.1.1.2 Syntax:
Status
|
Read-only |
The administrative status of OSPFv3 in the router.
The value 'enabled' denotes that the OSPFv3 Process is active on at
least one interface; 'disabled' disables it on all interfaces. This
object is persistent, and when written, the entity should save the
change to non-volatile storage. |
| ospfv3VersionNumber 1.3.6.1.2.1.191.1.1.3 Syntax:
INTEGER
|
Read-only |
The version number of OSPF for IPv6 is 3. |
| ospfv3AreaBdrRtrStatus 1.3.6.1.2.1.191.1.1.4 Syntax:
TruthValue
|
Read-only |
A flag to denote whether this router is an area
border router. The value of this object is true (1) when the router
is an area border router. |
| ospfv3ASBdrRtrStatus 1.3.6.1.2.1.191.1.1.5 Syntax:
TruthValue
|
Read-only |
A flag to note whether this router is configured
as an Autonomous System border router. This object is persistent,
and when written, the entity should save the change to non-volatile
storage. |
| ospfv3AsScopeLsaCount 1.3.6.1.2.1.191.1.1.6 Syntax:
Gauge32
|
Read-only |
The number of AS-scope (e.g., AS-External) link
state advertisements in the link state database. |
| ospfv3AsScopeLsaCksumSum 1.3.6.1.2.1.191.1.1.7 Syntax:
Unsigned32
|
Read-only |
The 32-bit unsigned sum of the LS checksums of the
AS-scoped link state advertisements contained in the link state
database. This sum can be used to determine if there has been a
change in a router's link state database or to compare the link
state database of two routers. |
| ospfv3OriginateNewLsas 1.3.6.1.2.1.191.1.1.8 Syntax:
Counter32
|
Read-only |
The number of new link state advertisements that
have been originated. This number is incremented each time the
router originates a new LSA. Discontinuities in the value of this
counter can occur at re-initialization of the management system and
at other times as indicated by the value of
ospfv3DiscontinuityTime. |
| ospfv3RxNewLsas 1.3.6.1.2.1.191.1.1.9 Syntax:
Counter32
|
Read-only |
The number of link state advertisements received
that are determined to be new instantiations. This number does not
include newer instantiations of self-originated link state
advertisements. Discontinuities in the value of this counter can
occur at re-initialization of the management system and at other
times as indicated by the value of ospfv3DiscontinuityTime. |
| ospfv3ExtLsaCount 1.3.6.1.2.1.191.1.1.10 Syntax:
Gauge32
|
Read-only |
The number of External (LS type 0x4005) in the
link state database. |
| ospfv3ExtAreaLsdbLimit 1.3.6.1.2.1.191.1.1.11 Syntax:
Integer32
|
Read-Write |
The maximum number of non-default AS-external-LSA
entries that can be stored in the link state database. If the value
is -1, then there is no limit. When the number of non-default
AS-external-LSAs in a router's link state database reaches
ospfv3ExtAreaLsdbLimit, the router enters Overflow state. The router
never holds more than ospfv3ExtAreaLsdbLimit non-default
AS-external-LSAs in its database. ospfv3ExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3 backbone and/or
any regular OSPFv3 area (i.e., OSPFv3 stub areas and
not-so-stubby-areas (NSSAs) are excluded). This object is
persistent, and when written, the entity should save the change to
non-volatile storage. |
| ospfv3ExitOverflowInterval 1.3.6.1.2.1.191.1.1.12 Syntax:
Unsigned32
|
Read-Write |
The number of seconds that, after entering
Overflow state, a router will attempt to leave Overflow state. This
allows the router to again originate non-default, AS-External-LSAs.
When set to 0, the router will not leave Overflow state until
restarted. This object is persistent, and when written, the entity
should save the change to non-volatile storage. |
| ospfv3ReferenceBandwidth 1.3.6.1.2.1.191.1.1.14 Syntax:
Unsigned32
|
Read-Write |
Reference bandwidth in kilobits per second for
calculating default interface metrics. The default value is 100,000
KBPS (100 MBPS). This object is persistent, and when written, the
entity should save the change to non-volatile storage. |
| ospfv3NotificationEnable 1.3.6.1.2.1.191.1.1.21 Syntax:
TruthValue
|
Read-Write |
This object provides a coarse level of control
over the generation of OSPFv3 notifications. If this object is set
to true (1), then it enables the generation of OSPFv3 notifications.
If it is set to false (2), these notifications are not generated.
This object is persistent, and when written, the entity should save
the change to non-volatile storage. |