System CPU utilization table

Name, OID, and syntax	Access	Description
snAgentCpuUtilTable 1.3.6.1.4.1.1991.1.1.2.11.1	None	The table to list utilization for all CPUs.
snAgentCpuUtilSlotNum 1.3.6.1.4.1.1991.1.1.2.11.1.1.1 Syntax: Integer32	Read-only	The slot number of the module that contains the CPU.
snAgentCpuUtilCpuId 1.3.6.1.4.1.1991.1.1.2.11.1.1.2 Syntax: Integer32	Read-only	The ID of the CPU: For non-VM1/WSM management module, there is one CPU. For VM1/WSM, there is one management CPU and three slave CPUs. The management CPU could be turned off. For POS and ATM, there is no management CPU but two slave CPUs. The ID for the management CPU is 1. A value of 2 and greater identifies the slave CPUs.
snAgentCpuUtilInterval 1.3.6.1.4.1.1991.1.1.2.11.1.1.3 Syntax: Integer32	Read-only	The value, in seconds, for this utilization. For both management and slave CPUs, utilizations for 1 sec, 5 sec, 60 sec, and 300 sec intervals are displayed.
snAgentCpuUtilPercent 1.3.6.1.4.1.1991.1.1.2.11.1.1.5 Syntax: Gauge32	Read-only	The statistical CPU utilization in units of one percent.
snAgentCpuUtil100thPercent 1.3.6.1.4.1.1991.1.1.2.11.1.1.6 Syntax: Gauge32	Read-only	The statistical CPU utilization in units of one-hundredth of a percent.