The Routing Information Protocol (RIP) is an IP route exchange protocol that uses
a distance vector (a number representing distance) to measure the cost of a given
route. The cost is a distance vector because the cost often is equivalent to the number
of hops between the Layer 3 Switch and the destination network.
A Layer 3 Switch can receive multiple paths to a
destination. A RIP route can have a maximum cost of 15.
Note: ICX 7150-ES and ICX 8100 devices do
not support RIP.
Name, OID, and syntax
Access
Description
snRtIpRipEnable
1.3.6.1.4.1.1991.1.2.3.1.1
Syntax: Integer
Read-write
Indicates if IP RIP routing is enabled:
disabled(0)
enabled(1)
Default: disabled(0)
snRtIpRipUpdateTime
1.3.6.1.4.1.1991.1.2.3.1.2
Syntax: Integer
Read-write
Specifies the RIP update interval in seconds.
Valid values: 1 - 21845 seconds
snRtIpRipRedisDefMetric
1.3.6.1.4.1.1991.1.2.3.1.4
Syntax: Integer
Read-write
Shows the default metric to be used when static routes are redistributed to RIP.