| ospfv3IfEntry 1.3.6.1.2.1.191.1.7.1 Syntax:
Ospfv3IfEntry
|
Not-accessible |
The OSPFv3
Interface Entry describes one interface from the viewpoint of
OSPFv3. The information in this table is persistent, and when
written, the entity should save the change to non-volatile
storage.
|
| ospfv3IfIndex 1.3.6.1.2.1.191.1.7.1.1 Syntax:
InterfaceIndex
|
Not-accessible |
The interface index of this OSPFv3 interface. It
corresponds to the interface index of the IPv6 interface on which
OSPFv3 is configured. |
| ospfv3IfInstId 1.3.6.1.2.1.191.1.7.1.2 Syntax:
Ospfv3IfInstIdTC
|
Not-accessible |
Enables multiple interface instances of OSPFv3 to
be run over a single link. Each interface instance would be assigned
a separate ID. This ID has local link significance only. |
| ospfv3IfAreaId 1.3.6.1.2.1.191.1.7.1.3 Syntax:
Ospfv3AreaIdTC
|
Read-create |
A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0, the default, is used for
the OSPFv3 backbone. |
| ospfv3IfType 1.3.6.1.2.1.191.1.7.1.4 Syntax:
INTEGER
|
Read-create |
The OSPFv3 interface type. |
| ospfv3IfAdminStatus 1.3.6.1.2.1.191.1.7.1.5 Syntax:
Status
|
Read-create |
The OSPFv3 interface's administrative status. The
value formed on the interface; the interface will be advertised as
an internal route to some area. The value 'disabled' denotes that
the interface is external to OSPFv3. Note that a value of 'disabled'
for the object ospfv3AdminStatus will override a value of 'enabled'
for the interface. |
| ospfv3IfRtrPriority 1.3.6.1.2.1.191.1.7.1.6 Syntax:
DesignatedRouterPriority
|
Read-create |
The priority of this interface. Used in
multi-access networks, this field is used in the designated-router
election algorithm. The value 0 signifies that the router is not
eligible to become the Designated Router on this particular network.
In the event of a tie in this value, routers will use their Router
ID as a tie breaker. |
| ospfv3IfTransitDelay 1.3.6.1.2.1.191.1.7.1.7 Syntax:
Ospfv3UpToRefreshIntervalTC
|
Read-create |
The estimated number of seconds it takes to
transmit a Link State Update packet over this interface. LSAs
contained in the update packet must have their age incremented by
this amount before transmission. This value should take into account
the transmission and propagation delays of the interface. |
| ospfv3IfRetransInterval 1.3.6.1.2.1.191.1.7.1.8 Syntax:
Ospfv3UpToRefreshIntervalTC
|
Read-create |
The number of seconds between link state
advertisement retransmissions for adjacencies belonging to this
interface. This value is also used when retransmitting database
description and Link State Request packets. |
| ospfv3IfHelloInterval 1.3.6.1.2.1.191.1.7.1.9 Syntax:
HelloRange
|
Read-create |
The length of time, in seconds, between the Hello
packets that the router sends on the interface. This value must be
the same for all routers attached to a common network. |
| ospfv3IfRtrDeadInterval 1.3.6.1.2.1.191.1.7.1.10 Syntax:
Ospfv3DeadIntervalRangeTC
|
Read-create |
The number of seconds that a router's Hello
packets have not been seen before its neighbors declare the router
down on the interface. This should be some multiple of the Hello
interval. This value must be the same for all routers attached to a
common network. |
| ospfv3IfState 1.3.6.1.2.1.191.1.7.1.12 Syntax:
INTEGER
|
Read-only |
The OSPFv3 interface state. An interface may be in
standby state if there are multiple interfaces on the link and
another interface is active. The interface may be in Down state if
the underlying IPv6 interface is down or if the admin status is
'disabled' either globally or for the interface. |
| ospfv3IfDesignatedRouter 1.3.6.1.2.1.191.1.7.1.13 Syntax:
Ospfv3RouterIdTC
|
Read-only |
The Router ID of the Designated Router. |
| ospfv3IfBackupDesignatedRouter 1.3.6.1.2.1.191.1.7.1.14 Syntax:
Ospfv3RouterIdTC
|
Read-only |
The Router ID of the Backup Designated
Router. |
| ospfv3IfEvents 1.3.6.1.2.1.191.1.7.1.15 Syntax:
Counter32
|
Read-only |
The number of times this OSPFv3 interface has
changed its state or an error has occurred. Discontinuities in the
value of this counter can occur at re-initialization of the
management system and at other times as indicated by the value of
ospfv3DiscontinuityTime. |
| ospfv3IfRowStatus 1.3.6.1.2.1.191.1.7.1.16 Syntax:
RowStatus
|
Read-create |
This object permits management of the table by
facilitating actions such as row creation, construction, and
destruction. The value of this object has no effect on whether other
objects in this conceptual row can be modified. |
| ospfv3IfMetricValue 1.3.6.1.2.1.191.1.7.1.18 Syntax:
Metric
|
Read-create |
The metric assigned to this interface. The default
value of the metric is 'Reference Bandwidth / ifSpeed'. The value of
the reference bandwidth can be set in the ospfv3ReferenceBandwidth
object. |
| ospfv3IfLinkScopeLsaCount 1.3.6.1.2.1.191.1.7.1.19 Syntax:
Gauge32
|
Read-only |
The total number of Link-scope link state
advertisements in this link's link state database. |
| ospfv3IfLinkLsaCksumSum 1.3.6.1.2.1.191.1.7.1.20 Syntax:
Unsigned32
|
Read-only |
The 32-bit unsigned sum of the Link-scope link
state advertisements' LS checksums contained in this link's link
state database. The sum can be used to determine if there has been a
change in a router's link state database or to compare the link
state database of two routers. |
| ospfv3IfLinkLSASuppression 1.3.6.1.2.1.191.1.7.1.25 Syntax:
TruthValue
|
Read-create |
Specifies whether or not link LSA origination is
suppressed for broadcast or NBMA interface types. The object is set
to value true (1) to suppress the origination. |