SNMP Parameter Configuration

Use the procedures in this section to perform the following configuration tasks:

  • Specify a Simple Network Management Protocol (SNMP) trap receiver.
  • Specify a source address and community string for all traps sent by the device.
  • Change the holddown time for SNMP traps.
  • Disable individual SNMP traps. (All traps are enabled by default.)
  • Disable traps for CLI access that is authenticated by a local user account, a RADIUS server, or a TACACS/TACACS+ server.

In this section:

  1. SNMP Trap Receiver
  2. Single Trap Source
  3. SNMP Trap Holddown Time
  4. Configuring SNMP Parameters
    You can configure SNMP parameters by specifying the SNMP trap receiver and source.
  5. Disabling SNMP Traps
  6. SNMP ifIndex
Parent topic: SNMP