Disabling the advertise system capabilities

By default, the system capabilities are automatically advertised when LLDP is enabled on a global basis.
To disable this advertisement, enter a command such as the following.
  1. Enter global configuration mode. 
    device# configure terminal
  2. Enter the following command to disable the lldp advertise system capabilities. 
    device# no lldp advertise system-capabilities ports e 1/2/4 to 1/2/12
Is it ok to place it here?

The system capabilities will appear similar to the following on the remote device, and in the CLI display output on the RUCKUS device (show lldp local-info). 

System capabilities :   bridge
Enabled capabilities:   bridge

The following task disables the lldp advertise system capabilities 

device# configure terminal
device# no lldp advertise system-capabilities ports e 1/2/4 to 1/2/12
Parent topic: System capabilities