Removing Breakout Configuration

Use the no breakout ethernet command to remove the breakout configuration.

Enter the no breakout ethernet command for an individual port or port range. However, for the restored port configuration to take effect, you must also use the write memory command and then use the reload command to update the configuration of the unit.

The following example shows how to return to default mode.

ICX7550-24F Router(config)# no slot 2 uplink-40g
Changes require reload to take effect. Please do write memory and then reload or power cycle!!!
Slot 2 will be operating in default mode after reload.
Parent topic: Overview of Breakout Ports