Displaying Flexlink Information

Use the show flexlink all command to display brief information about all Flexlink instances configured on the device.

device(config)# show flexlink all 
	Active Interface        Backup Interface        State  
	---------------------------------------------------------
	ethernet 1/1/9            ethernet 1/1/10       Active Up/Backup FL-Backup

	lag 10                    lag 11                Active Up/Backup FL-Backup

Use the show flexlink all detail command to display detailed information about all Flexlink instances configured on the device.

device(config)# show flexlink all detail
	Active Interface        Backup Interface        State  
	---------------------------------------------------------
	ethernet 1/1/9         ethernet 1/1/10          Active Up/Backup FL-Backup
	Preemption Mode: forced
	Preemption delay: 100
	Bandwidth : 1/1/9 (1Gbit), 1/1/10 (1Gbit)

	lag 10              lag 11                      Active Up/Backup FL-Backup
	Preemption Mode: Bandwidth
	Preemption delay: 100
	Bandwidth : lg10 (20G), lg11 (10G)

Use the show flexlink interface command to display brief information about a specific Flexlink interface (physical interface).

device(config)# show flexlink interface ethernet 1/1/9
	Active Interface        Backup Interface        State  
	---------------------------------------------------------
	ethernet 1/1/9         ethernet 1/1/10          Active Up/Backup FL-Backup

Use the show flexlink interface command with the detail keyword to display detailed information about a specific Flexlink interface (physical interface).

device(config)# show flexlink interface ethernet 1/1/9 detail
	Active Interface        Backup Interface        State  
	---------------------------------------------------------
	ethernet 1/1/9         ethernet 1/1/10             Active Up/Backup FL-Backup
	Preemption Mode: forced
	Preemption delay: 100
	Bandwidth : 1/1/9 (1Gbit), 1/1/10 (1Gbit)

Use the show flexlink interface command to display brief information about a specific Flexlink interface (LAG interface).

device(config)# show flexlink interface lag 10               
	Active Interface        Backup Interface        State  
	---------------------------------------------------------
	lag 10                  lag 11                Active Up/Backup FL-Backup

Use the show flexlink interface command with the detail keyword to display detailed information about a specific Flexlink interface (LAG interface).

device(config)# show flexlink interface lag 10 detail
	Active Interface        Backup Interface        State  
	---------------------------------------------------------
	lag 10              lag 11                Active Up/Backup FL-Backup
	Preemption Mode: bandwidth
	Preemption delay: 100
	Bandwidth : lg10 (20G), lg11 (10G)

The following example displays the Flexlink running configuration under the active link interface. The backup link does not generate any configuration.

device(config)# show running-config interface ethernet 1/1/9 ethernet 1/1/10
	 interface ethernet 1/1/9
         no spanning-tree
	   flexlink backup interface ethernet 1/1/10
          flexlink preemption mode forced
          flexlink preemption delay 100
	 
        interface ethernet 1/1/10
         no spanning-tree
         !

The following example displays the Flexlink status and the active link or backup link status under a specific interface.

device(config)# show interface ethernet 1/1/9 ethernet 1/1/10
	GigabitEthernet1/1/9 is up, line protocol is up 
	  Port up for 21 minute(s) 37 second(s) 
	  Hardware is GigabitEthernet, address is 609c.9f08.7c90 (bia 609c.9f08.7c90)
	  Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx
	  Configured mdi mode AUTO, actual MDIX
	  EEE Feature Disabled
	  Untagged member of L2 VLAN 1, port state is FORWARDING
	  BPDU guard is Disabled, ROOT protect is Disabled, Designated protect is Disabled
	  Link Error Dampening is Disabled
	  STP configured to OFF, priority is level0, mac-learning is enabled
	  MACsec is Disabled
	  Openflow is Disabled, Openflow Hybrid mode is Disabled, Flow Control is config enabled, oper enabled, negotiation disabled
	  Mirror disabled, Monitor disabled
	  Mac-notification is disabled
	  VLAN-Mapping is disabled
	  Not member of any active trunks
	  Not member of any configured trunks
	  No port name
	  IPG MII 96 bits-time, IPG GMII 96 bits-time
	  MTU 1500 bytes, encapsulation ethernet
	  MMU Mode is Store-and-forward
	  427423738 packets input, 147888438354 bytes, 0 no buffer
	  Received 427423113 broadcasts, 623 multicasts, 0 unicasts
	  0 input errors, 0 CRC, 0 frame, 0 ignored
	  0 runts, 0 giants
	  426927885 packets output, 147717044454 bytes, 0 underruns
	  Transmitted 426927868 broadcasts, 17 multicasts, 0 unicasts
	  0 output errors, 0 collisions
	  Relay Agent Information option: Disabled
	  Protected: No
	  MAC Port Security: Disabled
	  Flexlink: Enabled (Active link)

	UC Egress queues:
	Queue counters    Queued packets    Dropped Packets
			 0                   0                   0
			 1                   0                   0
			 2                   0                   0
			 3                   0                   0
			 4                   0                   0
			 5                   0                   0
			 6                   0                   0
			 7                  43                   0


	MC Egress queues:
	Queue counters    Queued packets    Dropped Packets
			 0           426961097                   0
			 1                   0                   0
			 2                   0                   0
			 3                   0                   0
device(config)# show interface ethernet 1/1/10
	GigabitEthernet1/1/10 is up, line protocol is down (FL-BACKUP) 
	  Port down (FL-BACKUP) for 21 minute(s) 47 second(s) 
	  Hardware is GigabitEthernet, address is 609c.9f08.7c91 (bia 609c.9f08.7c91)
	  Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx
	  Configured mdi mode AUTO, actual MDIX
	  EEE Feature Disabled
	  Untagged member of L2 VLAN 1, port state is BLOCKING
	  BPDU guard is Disabled, ROOT protect is Disabled, Designated protect is Disabled
	  Link Error Dampening is Disabled
	  STP configured to OFF, priority is level0, mac-learning is enabled
	  MACsec is Disabled
	  Openflow is Disabled, Openflow Hybrid mode is Disabled, Flow Control is config enabled, oper enabled, negotiation disabled
	  Mirror disabled, Monitor disabled
	  Mac-notification is disabled
	  VLAN-Mapping is disabled
	  Not member of any active trunks
	  Not member of any configured trunks
	  No port name
	  IPG MII 96 bits-time, IPG GMII 96 bits-time
	  MTU 1500 bytes, encapsulation ethernet
	  MMU Mode is Store-and-forward
	  418345415 packets input, 144747337532 bytes, 0 no buffer
	  Received 418344785 broadcasts, 628 multicasts, 0 unicasts
	  0 input errors, 0 CRC, 0 frame, 0 ignored
	  0 runts, 0 giants
	  77723 packets output, 26887364 bytes, 0 underruns
	  Transmitted 77706 broadcasts, 17 multicasts, 0 unicasts
	  0 output errors, 0 collisions
	  Relay Agent Information option: Disabled
	  Protected: No
	  MAC Port Security: Disabled
	  Flexlink: Enabled (Backup link)

	UC Egress queues:
	Queue counters    Queued packets    Dropped Packets
			 0                   0                   0
			 1                   0                   0
			 2                   0                   0
			 3                   0                   0
			 4                   0                   0
			 5                   0                   0
			 6                   0                   0
			 7                  42                   0


	MC Egress queues:
	Queue counters    Queued packets    Dropped Packets
			 0               77681                   0
			 1                   0                   0
			 2                   0                   0
			 3                   0                   0