Configuring the Overlay Next-Hop Partition Size

You must enable VXLAN RIOT before specifying the overlay next-hop hardware partition size.
  1. Enter global configuration mode.
    device# configure terminal
  2. Specify the size of the overlay next-hop hardware partition.
    • 4096 (4000 entries)
    • 8192 (8000 entries)
    • 12288 (12000 entries)
    • 16384 (16000 entries)
    device(config)# vxlan-riot overlay-nhop-partition 16384
  3. Write the changes to memory.
    device(config)# write memory
  4. Exit global configuration mode.
    device(config)# exit
  5. Reload the software changes to the hardware.
    device# reload
The following example specifies a partition size of 16384 entries.
device# configure terminal
device(config)# vxlan-riot overlay-nhop-partition 16384
device(config)# write memory
device(config)# exit
device# reload
Parent topic: VXLAN Routing In and Out of Tunnels (RIOT)