VRRP and VRRP-Extended MIBs

The following table contains the global objects that apply to Virtual Router Redundancy Protocol (VRRP), Virtual Router Redundancy Protocol Extended (VRRP-E), and Virtual Switch Redundancy Protocol (VSRP).

Name, OID, and syntax

Access

Description

snVrrpIfStateChangeTrap

brcdIp.1.2.12.1.2

Syntax: Integer

Read-write

Indicates if the SNMP agent process has been enabled to generate VRRP interface state change traps:

  • disabled(0)
  • enabled(1)

Default: enabled(1)

Note: The standard MIB “vrrpNotificationCntl” will work exactly the same as the Proprietary MIB "snVrrpIfStateChangeTrap”.
snVrrpIfMaxNumVridPerIntf

brcdIp.1.2.12.1.3

Syntax: Integer

Read-only

Indicates the maximum number of VRID per interface.

snVrrpIfMaxNumVridPerSystem

brcdIp.1.2.12.1.4

Syntax: Integer

Read-only

Indicates the maximum number of VRID per system.

snVrrpClearVrrpStat

brcdIp.1.2.12.1.5

Syntax: Integer

Read-write

Clear VRRP statistics command.

snVrrpGroupOperModeVrrpextended

brcdIp.1.2.12.1.6

Syntax: Integer

  The VRRP_extended is configured on this system is either enabled or disabled. The default is disabled mode.
  • disabled(0)
  • enabled(1)
Parent topic: IP VRRP MIB Definition