This first index for the entry in traceRouteCtlTable. The value is textually mapped
to a securityName or groupName defined in VACM.
traceRouteCtlTestName
Syntax: SnmpAdminString (SIZE(0..32))
None
The name of the traceroute test. This is locally unique, within the scope of a traceRouteCtlOwnerIndex.
traceRouteCtlTargetAddressType
Syntax: InetAddressType
Read-create
Specifies the type of host address to be used on the traceroute request at the remote
host. The following values are supported.
ipv4(1)
ipv6(2)
traceRouteCtlTargetAddress
Syntax: InetAddress
Read-create
Specifies the host address used on the traceroute request at the remote host.
A value for this object must be set prior to transitioning its corresponding traceRouteCtlEntry
to active(1) via traceRouteCtlRowStatus. The default value is 00 00 00 00.
traceRouteCtlTimeOut
Syntax: Unsigned32 (0..60)
Read-create
Specifies the time-out value, in seconds,for a traceroute request.
Note: Default Value 3 Seconds.
traceRouteCtlMaxTtl
Syntax: Unsigned32 (1..255)
Read-create
Specifies the maximum time-to-live value.
Note: Default value is 30.
traceRouteCtlSourceAddressType
Syntax: InetAddressType
Read-create
Specifies the type of the source address, traceRouteCtlSourceAddress. Default value
is unknown.
Note: IPv4 and IPv6 are supported.
traceRouteCtlSourceAddress
Syntax: InetAddress
Read-create
Use the specified IP address (which must be given as an IP number, not as a hostname)
as the source address in the outgoing probe packets. On hosts with more than one IP
address, this option is used to select the address to be used. If the IP address is
not one of the interface addresses of the machine, an error is returned, and nothing
is sent. A zero-length octet string value for this object disables source address
specification.
Note: Host name is not supported. Specify IPv4 or IPv6 address.
traceRouteCtlInitialTtl
Syntax: Unsigned32 (1..255)
Read-create
The value of this object specifies the initial TTL value to use. This enables bypassing
the initial (often well known) portion of a path. Default value is 1.
traceRouteCtlStorageType
Syntax: StorageType
Read-create
The storage type for this conceptual row. Conceptual rows having the value ’permanent’
need not allow write-access to any columnar objects in the row.
Note: Only
Read-only access supported for this object. The object always returns value of volatile(2)
(is lost upon reboot).
traceRouteCtlAdminStatus
Syntax:
INTEGER
Read-create
This object defines the state of traceRouteCtlEntry.
enabled(1) - operation should be started.
disabled(2) - operation should be stopped
'Disabled' is the default value.
traceRouteCtlDescr
Syntax: SnmpAdminString
Read-create
Descriptive name of the remote traceroute test. Maximum 255 characters.
traceRouteCtlMaxRows
Syntax: Unsigned32
Read-create
The maximum number of corresponding entries allowed in the traceRouteProbeHistoryTable.
A value of 0 for this object disables creation of traceRouteProbeHistoryTable entries.
The default value is 50.
Note: Only
Read-only access supported for this object.
traceRouteCtlTrapGeneration
Syntax: BITS {
pathChange(0),
testFailure(1),
testCompletion(2)
}
Read-create
The value of this object determines when and whether to generate a notification for
this entry:
pathChange(0) - Generate a traceRoutePathChange notification when the current path
varies from a previously determined path.
testFailure(1) - Generate a traceRouteTestFailed notification when the full path to
a target can't be determined.
testCompletion(2) - Generate a traceRouteTestCompleted notification when the path
to a target has been determined.
traceRouteCtlCreateHopsEntries
Syntax: TruthValue
Read-create
The current path for a traceroute test is kept in the traceRouteHopsTable on a per-hop
basis when the value of this object is true(1).
Note: Only Read-only access supported for this object.
traceRouteCtlType
Syntax: OBJECT IDENTIFIER
Read-create
The value of this object is used either to report or to select the implementation
method to be used for performing a traceroute operation. The value of this object
may be selected from traceRouteImplementationTypeDomains.
Note: Only Read-only access supported for this object.
traceRouteCtlRowStatus
Syntax: RowStatus
Read-create
This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion
of an entry in this table results in a deletion of all corresponding (same traceRouteCtlOwnerIndex
and traceRouteCtlTestName index values) traceRouteResultsTable, traceRouteProbeHistoryTable,
and traceRouteHopsTable entries.