Stacking configuration unit table

Use the following table to display and configure stacking information for each unit.

Name, OID, and syntax

Access

Description

snStackingConfigUnitTable

brcdIp.1.1.3.31.2.1

None

The stacking configuration table.

snStackingConfigUnitIndex

brcdIp.1.1.3.31.2.1.1.1

Syntax: Integer

None

The ID of the unit in a stack.

snStackingConfigUnitPriority

brcdIp.1.1.3.31.2.1.1.2

Syntax: Integer32

Read-write

The priority in active or backup election.

Value can be from 0 through 255.

snStackingConfigUnitConfigStackPort

brcdIp.1.1.3.31.2.1.1.3

Syntax: InterfaceIndex

Read-write

Not supported beginning release 08.0.90.

The IfIndex for the configured stacking port. If no stacking port is configured, this object displays zero and the first two 10 Gigabit ports as the default stacking ports. Enter zero to remove the configured stacking port.

snStackingConfigUnitRowStatus

brcdIp.1.1.3.31.2.1.1.4

Syntax: Integer

Read-write

This object is used to delete a row in the table and control if they are used. The following values can be written for a SET:

  • delete(3) - Deletes the row. Deleted rows are deleted immediately.

The following values can be returned on reads:

  • noSuchName - No such row
  • other(1) - Some other cases
  • valid(2) - The row exists and is valid
snStackingConfigUnitType

brcdIp.1.1.3.31.2.1.1.5

Syntax: DisplayString

Read-only

A description of the configured or active system type for each unit.

snStackingConfigUnitState

brcdIp.1.1.3.31.2.1.1.6

Syntax: Integer

Read-only

The state of the unit:

  • local(1)
  • remote(2)
  • reserved(3)
  • empty(4)
snStackingConfigUnitStackPort1

brcdIp.1.1.3.31.2.1.1.7

Syntax: InterfaceIndex

Read-write

First stack port for each unit. It returns 0 if the stack port does not exist.

snStackingConfigUnitStackPort2

brcdIp.1.1.3.31.2.1.1.8

Syntax: InterfaceIndex or zero

Read-write

Second stack port for each unit. It returns 0 if the stack port does not exist.

snStackingConfigUnitStackTrunk1

brcdIp.1.1.3.31.2.1.1.11

Syntax: Octet String

Read-write

A list of interface indices which are the port membership of a stack trunk on unit. Each interface index is a 32-bit integer in big endian order. It returns NULL if stack trunk does not exist.

Entering an empty octet string means to delete this stack trunk.

Note that the maximum stack trunk on a unit is 2. Each stack trunk contains up to 16 ports.

snStackingConfigUnitStackTrunk2

brcdIp.1.1.3.31.2.1.1.12

Syntax: Octet String

Read-write

A list of interface indices which are the port membership of a stack trunk on unit. Each interface index is a 32-bit integer in big endian order. It returns NULL if stack trunk does not exist.

Entering empty octet string means to delete this stack trunk.

Note that the maximum stack trunk on an unit is 2. Each stack trunk contains up to 16 ports.

snStackingConfigUnitName

brcdIp.1.1.3.31.2.1.1.13

Syntax: DisplayString (Size 0 - 64)

Read-write

A name description of stacking unit.
Parent topic: Stacking MIB Definition