| snPortCARTable
brcdIp.1.1.3.16.1.1
|
None
|
The CAR port table.
|
| snPortCARifIndex
brcdIp.1.1.3.16.1.1.1.1
Syntax: Integer
|
Read-only
|
Shows the ifIndex value for this rate limit entry.
|
| snPortCARDirection
brcdIp.1.1.3.16.1.1.1.2
Syntax: Integer
|
Read-only
|
Specifies the transmission direction of the rate-limit object:
- input(0) - For inbound traffic.
- output(1) - For outbound traffic.
|
| snPortCARRowIndex
brcdIp.1.1.3.16.1.1.1.3
Syntax: Integer
|
Read-only
|
Shows the table index for rate limit objects. Rows are numbered in sequential order.
When a row is added, it is assigned the next sequential number. When a row is deleted,
the row is skipped.
|
| snPortCARType
brcdIp.1.1.3.16.1.1.1.4
Syntax: RateLimitType
|
Read-only
|
Shows the type of traffic to which the rate limit is applied:
- standardAcc(1) - Traffic matches standard access list.
- quickAcc(2) - Traffic matches the rate-limit access list.
- all(3) - All traffic.
|
| snPortCARAccIdx
brcdIp.1.1.3.16.1.1.1.5
Syntax: Integer32
|
Read-only
|
Indicates the index to the access list if the rate limit type is one of the following:
- standardAcc(1) - Traffic matches standard access list.
- quickAcc(2) - Traffic matches the rate-limit access list.
|
| snPortCARRate
brcdIp.1.1.3.16.1.1.1.6
Syntax: Integer32
|
Read-write
|
Shows the committed access rate for the long-term average transmission rate in bits
per second. Traffic that falls under this rate always conforms to this rate.
|
| snPortCARLimit
brcdIp.1.1.3.16.1.1.1.7
Syntax: Integer32
|
Read-write
|
Shows the normal burst size in bytes. Normal burst size is the number of bytes that
are guaranteed to be transported by the network at the average rate under normal conditions
during the committed time interval.
|
| snPortCARExtLimit
brcdIp.1.1.3.16.1.1.1.8
Syntax: Integer32
|
Read-only
|
Shows the extended burst limit in bytes. The extended burst limit determines how large
traffic bursts can be before all the traffic exceeds the rate limit.
|
| snPortCARConformAction
brcdIp.1.1.3.16.1.1.1.9
Syntax: Integer
|
Read-only
|
Indicates what happens to packets when the traffic is within the rate limit:
- continue(1) - Continue to evaluate the subsequent rate limits.
- drop(2) - Drop the packet.
- precedCont(3) - Rewrite the IP precedence and allow it after evaluated by subsequent
rate limits.
- precedXmit(4) - Rewrite the IP precedence and transmit the packet.
- xmit(5) - Transmit the packet.
|
| snPortCARExceedAction
brcdIp.1.1.3.16.1.1.1.10
Syntax: Integer
|
Read-only
|
Indicates what happens to packets when the traffic exceeds the rate limit:
- continue(1) - Continue to evaluate the subsequent rate limits.
- drop(2) - Drop the packet.
- precedCont(3) - Rewrite the IP precedence and allow it after evaluated by subsequent
rate limits.
- precedXmit(4) - Rewrite the IP precedence and transmit the packet.
- xmit(5) - Transmit the packet.
|
| snPortCARStatSwitchedPkts
brcdIp.1.1.3.16.1.1.1.11
Syntax: Counter64
|
Read-only
|
Indicates the number of packets permitted by this rate limit.
|
| snPortCARStatSwitchedBytes
brcdIp.1.1.3.16.1.1.1.12
Syntax: Counter64
|
Read-only
|
Indicates the number of bytes permitted by this interface.
|
| snPortCARStatFilteredPkts
brcdIp.1.1.3.16.1.1.1.13
Syntax: Counter64
|
Read-only
|
Indicates the number of packets that exceeded this rate limit.
|
| snPortCARStatFilteredBytes
brcdIp.1.1.3.16.1.1.1.14
Syntax: Counter64
|
Read-only
|
Indicates the number of bytes that exceeded this rate limit.
|
| snPortCARStatCurBurst
brcdIp.1.1.3.16.1.1.1.15
Syntax: Gauge32
|
Read-only
|
Shows the current burst size of received packets.
|
| snPortCARRowStatus brcdIp.1.1.3.16.1.1.1.16 Syntax: RowStatus
|
Read-create |
The variable is used to create new row in the rate
limit table. The supported values are CreateAndGo(4) and
destroy(6). |