| snAuthenticationDot1x
1.3.6.1.4.1.1991.1.1.3.15.1.1
Syntax: OCTET STRING (SIZE(0..3))
|
Read-write
|
A sequence of authentication methods. Each octet represents a method to authorize
the user command. Each octet has the following value:
- radius(2) - authenticate by requesting radius server
- none(6) - no authentication
Setting a zero length octet string invalidates all previous authentication methods.
|
| snAuthenticationEnable
1.3.6.1.4.1.1991.1.1.3.15.1.2
Syntax: OCTET STRING (SIZE(0..3))
|
Read-write
|
A sequence of authentication methods. Each octet represents a method to authorize
the user command. Each octet has the following value:
- enable(1) - Use enable password for authentication
- radius(2) - authenticate by requesting radius server
- local(3) - Use local user for authentication
- line(4) - Use line (telnet) password for authentication
- tacplus(5) - authenticate by requesting tacplus server
- none(6) - no authentication
- tacacs(7) - Use TACACS authentication
Setting a zero length octet string invalidates all previous authentication methods.
|
| snAuthenticationLogin
1.3.6.1.4.1.1991.1.1.3.15.1.3
Syntax: OCTET STRING (SIZE(0..3))
|
Read-write
|
A sequence of authentication methods. Each octet represents a method to authorize
the user command. Each octet has the following value:
- enable(1) - Use enable password for authentication
- radius(2) - authenticate by requesting radius server
- local(3) - Use local user for authentication
- line(4) - Use line (telnet) password for authentication
- tacplus(5) - authenticate by requesting tacplus server
- none(6) - no authentication
- tacacs(7) - Use TACACS authentication
Setting a zero length octet string invalidates all previous authentication methods.
|
| snAuthenticationSnmpserver
1.3.6.1.4.1.1991.1.1.3.15.1.4
Syntax: OCTET STRING (SIZE(0..3))
|
Read-write
|
A sequence of authentication methods. Each octet represents a method to authorize
the user command. Each octet has the following value:
- enable(1) - Use enable password for authentication
- local(3) - Use local user for authentication
- none(6) - no authentication
Setting a zero length octet string invalidates all previous authentication methods.
|
| snAuthenticationWebserver
1.3.6.1.4.1.1991.1.1.3.15.1.5
Syntax: OCTET STRING (SIZE(0..3))
|
Read-write
|
A sequence of authentication methods. Each octet represents a method to authorize
the user command. Each octet has the following value:
- enable(1) - Use enable password for authentication
- radius(2) - authenticate by requesting radius server
- local(3) - Use local user for authentication
- line(4) - Use line (telnet) password for authentication
- tacplus(5) - authenticate by requesting tacplus server
- none(6) - no authentication
- tacacs(7) - Use TACACS authentication
Setting a zero length octet string invalidates all previous authentication methods.
|
| snAuthorizationCommand Methods
brcdIp.1.1.3.15.2.1
Syntax: Octet String
|
Read-write
|
Specifies the sequence of authorization methods.
This object can have zero to three octets. Each octet represents a method to authorize
the user command. Each octet has the following value:
- radius(2) - Authorize by the requesting RADIUS server
- tacplus(5) - Authorize by the requesting TACACS+ server
- none(6) - Skip authorization
Setting a zero length octet string invalidates all previous authorization methods.
|
| snAuthorizationCommandLevel
brcdIp.1.1.3.15.2.2
Syntax: IpAddress
|
Read-write
|
Specifies the commands that must be authorized. Any command that is equal to or less
than the selected level will be authorized:
- level(0) - Privilege level 0
- level(4) - Privilege level 4
- level(5) - Privilege level 5
|
| snAuthorizationExec
brcdIp.1.1.3.15.2.3
Syntax: Octet String
|
Read-write
|
Shows the sequence of authorization methods for EXEC programs.
This object can have zero to three octets. Each octet represents a method for Telnet
or SSH login authorization. Each octet can have one of the following values:
- radius(2) - Send EXEC authorization request to the RADIUS server .
- tacplus(5) - Send EXEC authorization request to the TACACS+ server .
- none(6) - No EXEC authorization method.
Setting a zero length octet string invalidates all authorization methods.
|
| snAuthorizationCoaEnable
1.3.6.1.4.1.1991.1.1.3.15.2.4
Syntax: Integer
|
Read-write
|
Enables or disables change of authorization (CoA). Possible values:
- 1 - Enable CoA
- 2 - Disable CoA
|
| snAuthorizationCoaIgnore 1.3.6.1.4.1.1991.1.1.3.15.2.5 Syntax: Octet string
(size (0...5))
|
Read-write
|
For change of Authorization (COA) ignore COA commands. Possible enumeration values:
- dm-request(1) - Disconnect message request
- modify-acl(2) - Modify access control list
- reauth-host(4) - Re-authenticate the host
- disable-port(8) - Disable the port
- flip-port(10) - Bounce the port."
|
| snAccountingCommandMethods
brcdIp.1.1.3.15.3.1
Syntax: Octet String
|
Read-write
|
Shows a sequence of accounting methods.
This object can have zero to three octets. Each octet represents an accounting method.
Each octet can have one of the following values:
- radius(2) - Send accounting information to the RADIUS server.
- tacplus(5) - Send accounting information to the TACACS+ server.
- none(6) - No accounting method.
Setting a zero length octet string invalidates all authorization methods.
|
| snAccountingCommandLevel
brcdIp.1.1.3.15.3.2
Syntax: Integer
|
Read-write
|
Specifies the commands that need to be accounted for. Any command that is equal to
or less than the selected level will be accounted for:
- level(0) - Privilege level 0
- level(4) - Privilege level 4
- level(5) - Privilege level 5
|
| snAccountingExec
brcdIp.1.1.3.15.3.3
Syntax: Octet String
|
Read-write
|
Shows the sequence of accounting methods for EXEC programs.
This object can have zero to three octets. Each octet represents a method for Telnet
or SSH login accounting. Each octet can have one of the following values:
- radius(2) - Send accounting information to the RADIUS server.
- tacplus(5) - Send accounting information to the TACACS+ server.
- none(6) - No accounting method.
Setting a zero length octet string invalidates all authorization methods.
|
| snAccountingSystem
brcdIp.1.1.3.15.3.4
Syntax: Octet String
|
Read-write
|
A sequence of accounting methods.
This object can have zero to three octets. Each octet represents a method to account
for the system-related events. Each octet has the following values:
- radius(2) - Send accounting information to the RADIUS server.
- tacplus(5) - Send accounting information to the TACACS+ server.
- none(6) - No accounting method.
Setting a zero length octet string invalidates all previous accounting methods.
|