The fdryLinkAggregationGroupTable object replaces the
snLinkAggregationGroupTable objects .
Note: SNMPSET request for the table always return hashbased and ignores the trunktype parameter.
Name, OID, and syntax
Access
Description
fdryLinkAggregationGroupTable
brcdIp.1.1.3.33.1.1
None
The Link Aggregation Group (LAG) table.
fdryLinkAggregationGroupName
brcdIp.1.1.3.33.1.1.1.1
Syntax: DisplayString
None
Displays the name of a LAG.
fdryLinkAggregationGroupType
brcdIp.1.1.3.33.1.1.1.2
Syntax: Integer
Read-create
Displays the LAG type.
fdryLinkAggregationGroupIfList
brcdIp.1.1.3.33.1.1.1.4
Syntax: Octet String
Read-create
Displays a list of interface indices which are the port memberships of a trunk group.
Each interface index is a 32-bit integer in big-endian order.
Note: This object accepts a 32-bit integer only.
fdryLinkAggregationGroupTrunkType
brcdIp.1.1.3.33.1.1.1.6
Syntax: Integer
Read-create
Displays the trunk connection type, which specifies the scheme of load-sharing among
the trunk ports.
fdryLinkAggregationGroupTrunkThreshold
brcdIp.1.1.3.33.1.1.1.7
Syntax: Unsigned32
Read-create
Displays the number of up ports needed to keep the trunk up.
Note: This object is not applicable to keepalive LAGs.
fdryLinkAggregationGroupLacpTimeout
brcdIp.1.1.3.33.1.1.1.8
Syntax: Integer
Read-create
Displays the LACP timeout value this LACP LAG will use. Applicable for dynamic and
keepalive LAGs only.
fdryLinkAggregationGroupIfIndex
brcdIp.1.1.3.29.2.1.1.9
Syntax: InterfaceIndex
Read-only
After a LAG is deployed, this object displays information for the LAG entry in the
ifTable. Use the variabe to access the entry in the ifTable and ifXTable. Zero(0)
is returned for LAGs that have not been deployed.
fdryLinkAggregationGroupPortCount
brcdIp.1.1.3.33.1.1.1.10
Syntax: Unsigned32
Read-only
Displays the number of member ports that belong to this LAG.
fdryLinkAggregationGroupRowStatus
brcdIp.1.1.3.33.1.1.1.11
Syntax: RowStatus
Read-create
Displays the status of this conceptual row.
createAndWait(5) is not supported.
To create a row in this table, a manager must set this object to createAndGo(4) together
with the setting of fdryLinkAggregationGroupType. After that, the row status becomes
active(1) regardless of whether or not the LAG entry is deployed.
fdryLinkAggregationGroupId
brcdIp.1.1.3.33.1.1.1.12
Syntax: Unsigned 32
Read-write
Updated.
The numeric identifier assigned to this LAG.
fdryLinkAggregationGroupLacpMode
brcdIp.1.1.3.33.1.1.1.13
Syntax: Unsigned 32
New object.
Read-write
The LACP mode value that the specified LAG will use. This value is applicable to dynamic
and keepalive LAGs only.
0—LACP mode not supported.
1—LACP mode is active.
2—LACP mode is passive.
Note: The LACP mode value is 0 for static lag LACP mode.
fdryLinkAggregationGroupLagMac
brcdIp.1.1.3.33.1.1.1.14
Syntax: MAC address
New object.
Read-write
Indicates the MAC address assigned to a LAG interface. The format of the MAC address
is HHHH.HHHH.HHHH.