You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

RUCKUS FastIron MIB Reference, 09.0.10 53-1005724-09

RUCKUS-VXLAN-MIB Table

The following table gives the management information for the configuration of VXLAN feature. VXLAN MIB is a RUCKUS proprietary implementation.

Table for overlay gateway configuration

Name, OID, and syntax	Access	Description
ruckusVxlanMIB snSwitch.49	Not-accessible	Initial version to support VXLAN feature.
ruckusVxlanOverlayGatewayTable snSwitch.49.1.1.1 Synatx: SEQUENCE OF RuckusVxlanOverlayGatewayEntry	Not-accessible	This table provides the general configuration details related to an overlay gateway. When a new overlay gateway is created, a new entry will be added in this table.
ruckusVxlanOverlayGatewayEntry snSwitch.49.1.1.1.1 Synatx: RuckusVxlanOverlayGatewayEntry	Not-accessible	A row instance of the overlay gateway table.
ruckusVxlanOverlayGatewayName snSwitch.49.1.1.1.1.1 Synatx: DisplayString (SIZE(0..64))	Not-accessible	VXLAN overlay gateway name.
ruckusVxlanOverlayGatewayType snSwitch.49.1.1.1.1.2 Synatx:INTEGER { none(0), l2Extension(1) }	Read-write	VXLAN overlay gateway name type. The only supported type is layer2 extension (1).
ruckusVxlanOverlayGatewayLoopbackId snSwitch.49.1.1.1.1.3 Synatx: Integer32	Read-write	VXLAN overlay gateway loopback ID.
ruckusVxlanOverlayGatewayMappedVlans snSwitch.49.1.1.1.1.4 Synatx: Integer32	Read-only	VXLAN overlay gateway number of mapped VLANs.
ruckusVxlanOverlayGatewayExtendedSites snSwitch.49.1.1.1.1.5 Synatx: Integer32	Read-only	VXLAN overlay gateway number of extended sites.
ruckusVxlanOverlayGatewayRowStatus snSwitch.49.1.1.1.1.6 Synatx: INTEGER { invalid(1), valid(2), delete(3), create(4) }	Read-write	This object is used to create and delete row in the table and control, if they are used. The following values can be returned on reads: noSuch(0) - no such row invalid(1) - setting to 'invalid' has the effect of rendering it inoperative. valid(2) - the row exists and is valid. delete(3)-deletes the row create(4) -creates a new row If a row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately.

Table for defining VLAN-VNI mapping attributes in an overlay gateway

Name, OID, and syntax	Access	Description
ruckusVxlanOverlayGatewayVlanMapTable snSwitch.49.1.1.2 Synatx: SEQUENCE OF RuckusVxlanOverlayGatewayVlanMapEntry	Not-accessible	This table provides the information related to the VLAN-VNI mapping which is included in an overlay gateway.
ruckusVxlanOverlayGatewayVlanMapEntry snSwitch.49.1.1.2.1 Syntax: RuckusVxlanOverlayGatewayVlanMapEntry	Not-accessible	A row instance of the overlay gateway VLAN map table.
ruckusVxlanOverlayGatewayVlanMapVlanId snSwitch.49.1.1.2.1.1 Syntax: Integer32	Not-accessible	VLAN index of the VLAN - VNI mapping.
ruckusVxlanOverlayGatewayVlanMapVniId snSwitch.49.1.1.2.1.2 Syntax: Integer32	Read-write	VNI index of the VLAN - VNI mapping.
ruckusVxlanOverlayGatewayVlanMapVfiId snSwitch.49.1.1.2.1.3 Syntax: RuckusVxlanOverlayGatewayVlanMapEntry	Read-only	VFI index of the VLAN - VNI mapping.
ruckusVxlanOverlayGatewayVlanMapCrossConnect snSwitch.49.1.1.2.1.4 Syntax: INTEGER { disabled(0), enabled(1) }	Read-only	The cross-connect setting for a VLAN-VNI mapping. The value is 0, if cross-connect setting is disabled and the value is 1, if cross-connect setting is enabled.
ruckusVxlanOverlayGatewayVlanMapStatistics snSwitch.49.1.1.2.1.5 Syntax: INTEGER { disabled(0), enabled(1) }	Read-only	The VXLAN statistics for a VLAN-VNI mapping. The value is 0, if setting is disabled and value is 1, if setting is enabled.
ruckusVxlanOverlayGatewayVlanMapAccessPortCount snSwitch.49.1.1.2.1.6 Syntax: Integer32	Read-only	The number of access ports added to the VLAN.
ruckusVxlanOverlayGatewayVlanMapExtendedSite Switch.49.1.1.2.1.7 Syntax: Integer32	Read-only	The number of sites the VLAN - VNI mapping is extended.
ruckusVxlanOverlayGatewayVlanMapRowStatus snSwitch.49.1.1.2.1.8 Syntax: INTEGER { invalid(1), valid(2), delete(3), create(4) }	Read-write	This object is used to create and delete row in the table and control, if they are used. The following values can be returned on reads: noSuch(0) - no such row invalid(1) - setting to 'invalid' has the effect of rendering it inoperative. valid(2) - the row exists and is valid. delete(3)-deletes the row create(4) -creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately.
ruckusVxlanOverlayGatewayVlanMapInUnicastPackets snSwitch.49.1.1.2.1.9 Syntax: Counter64	Read-only	The number of incoming unicast packets on the VNI.
ruckusVxlanOverlayGatewayVlanMapInUnicastBytes snSwitch.49.1.1.2.1.10 Syntax: Counter64	Read-only	The number of incoming unicast bytes on the VNI.
ruckusVxlanOverlayGatewayVlanMapInMulticastPackets snSwitch.49.1.1.2.1.11 Syntax: Counter64	Read-only	The number of incoming multicast packets on the VNI.
ruckusVxlanOverlayGatewayVlanMapInMutlticastBytes snSwitch.49.1.1.2.1.12 Syntax: Counter64	Read-only	The number of incoming multicast bytes on the VNI.
ruckusVxlanOverlayGatewayVlanMapInBroadcastPackets snSwitch.49.1.1.2.1.13 Syntax: Counter64	Read-only	The number of incoming broadcast packets on the VNI.
ruckusVxlanOverlayGatewayVlanMapInBroadcastBytes snSwitch.49.1.1.2.1.14 Syntax: Counter64	Read-only	The number of incoming broadcast bytes on the VNI.
ruckusVxlanOverlayGatewayVlanMapOutPackets snSwitch.49.1.1.2.1.15 Syntax: Counter64	Read-only	The number of outgoing packets on the VNI.
ruckusVxlanOverlayGatewayVlanMapOutBytes snSwitch.49.1.1.2.1.16 Syntax: Counter64	Read-only	The number of outgoing bytes on the VNI.

Table to show details for a site extended in an overlay gateway

Name, OID, and syntax	Access	Description
ruckusVxlanOverlayGatewaySiteTable snSwitch.49.1.1.3 Syntax: SEQUENCE OF RuckusVxlanOverlayGatewaySiteEntry	Not-accessible	This table provides the information related to the external site which is extended by an overlay gateway.
ruckusVxlanOverlayGatewaySiteEntry snSwitch.49.1.1.3.1 Syntax: RuckusVxlanOverlayGatewaySiteEntry	Not-accessible	A row instance of the overlay gateway site table.
ruckusVxlanOverlayGatewaySiteName snSwitch.49.1.1.3.1.1 Syntax: DisplayString (SIZE(0..64))	Not-accessible	The VXLAN extended site name.
ruckusVxlanOverlayGatewaySiteIpAddress snSwitch.49.1.1.3.1.2 Syntax: IpAddress	Read-write	The VXLAN extended site's IP address.
ruckusVxlanOverlayGatewaySiteStatus snSwitch.49.1.1.3.1.3 Syntax: TruthValue	Read-only	The VXLAN extended site's status. The value is true, if site is up and value is down, if site is down.
ruckusVxlanOverlayGatewaySiteRowStatus snSwitch.49.1.1.3.1.4 Syntax: INTEGER { invalid(1), valid(2), delete(3), create(4) }	Read-write	This object is used to create and delete row in the table and control, if they are used. The following values can be returned on reads: noSuch(0) - no such row invalid(1) - setting to 'invalid' has the effect of rendering it inoperative. valid(2) - the row exists and is valid. delete(3)-deletes the row create(4) -creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately.
ruckusVxlanOverlayGatewaySiteInUnicastPackets snSwitch.49.1.1.3.1.5 Syntax: Counter64	Read-only	The number of incoming unicast packets on the site's network virtual port.
ruckusVxlanOverlayGatewaySiteInUnicastBytes snSwitch.49.1.1.3.1.6 Syntax: Counter64	Read-only	The number of incoming unicast bytes on the site's network virtual port.
ruckusVxlanOverlayGatewaySiteInMulticastPackets snSwitch.49.1.1.3.1.7 Syntax: Counter64	Read-only	The number of incoming multicast packets on the site's network virtual port.
ruckusVxlanOverlayGatewaySiteInMutlticastBytes snSwitch.49.1.1.3.1.8 Syntax: Counter64	Read-only	The number of incoming multicast bytes on the site's network virtual port.
ruckusVxlanOverlayGatewaySiteInBroadcastPackets snSwitch.49.1.1.3.1.9 Syntax: Counter64	Read-only	The number of incoming broadcast packets on the site's network virtual port.
ruckusVxlanOverlayGatewaySiteInBroadcastBytes snSwitch.49.1.1.3.1.10 Syntax: Counter64	Read-only	The number of incoming broadcast bytes on the site's network virtual port.
ruckusVxlanOverlayGatewaySiteOutPackets snSwitch.49.1.1.3.1.11 Syntax: Counter64	Read-only	The number of outgoing packets on the site's network virtual port.
ruckusVxlanOverlayGatewaySiteOutBytes snSwitch.49.1.1.3.1.12 Syntax: Counter64	Read-only	The number of outgoing bytes on the site's network virtual port.
ruckusVxlanOverlayGatewaySiteMonitoring snSwitch.49.1.1.3.13 Syntax: TruthValue	Read-only	Provides the VXLAN extended site's monitoring status. The value is true if monitoring is enabled, and the value is false if monitoring is disabled.
ruckusVxlanOverlayGatewaySiteKeepAlive snSwitch.49.1.1.3.14 Syntax: Integer32	Read-write	Provides the value of the keepalive timer in the VXLAN monitoring mechanism. The keepalive timer denotes the frequency of ICMP pings being sent from the unit. Value can be between 1 through 20.
ruckusVxlanOverlayGatewaySiteRetry snSwitch.49.1.1.3.15 Syntax: Integer32	Read-write	Provides the retry value for the VXLAN monitoring mechanism. The retry values denotes the number of retries are allowed for ICMP pings before a remote VTEP is considered unavailable. Value can be between 1 through 5.

Table for defining extended VLANs in a site

Name, OID, and syntax	Access	Description
ruckusVxlanOverlayGatewaySiteExtVlanTable snSwitch.49.1.1.4 Syntax: SEQUENCE OF RuckusVxlanOverlayGatewaySiteExtVlanEntry	Not accessible	This table provides the information related to the VLAN extended to an external site in an overlay gateway.
ruckusVxlanOverlayGatewaySiteExtVlanEntry snSwitch.49.1.1.4.1 Syntax: RuckusVxlanOverlayGatewaySiteExtVlanEntry	Not accessible	A row instance of the overlay gateway extended site VLAN table.
ruckusVxlanOverlayGatewaySiteExtVlanId snSwitch.49.1.1.4.1.1 Syntax: Integer32	Not accessible	The VLAN index extended to the site.
ruckusVxlanOverlayGatewaySiteExtVlanRowStatus snSwitch.49.1.1.4.1.2 Syntax: INTEGER { noSuch(0), invalid(1), valid(2), delete(3), create(4) }	Read-write	This object is used to create and delete rows in the table and control, if they are used. The following values can be returned on reads: noSuch(0): No such row invalid(1): Setting to "invalid" has the effect of rendering it inoperative valid(2): The row exists and is valid delete(3): Deletes the row create(4): Creates a new row. If the row exists, then a SET with a value of create(4) returns a "badValue" error. Deleted rows go away immediately.

Did you find what you were looking for?