The following OIDs are used to get
the status of a specific virtual interface.
Name, OID, and syntax
Access
Description
ruckusDhcpClient
1.3.6.1.4.1.1991.1.1.3.46
RUCKUS DHCP client feature list.
ruckusDhcpClientGlobalObjects
1.3.6.1.4.1.1991.1.1.3.46.1
Lists the DHCP client global commands.
ruckusDhcpClientGlobalConfigState
1.3.6.1.4.1.1991.1.1.3.46.1.1
Syntax: Integer
Read-write
Configure state for DHCP client on the global level.
enabled(1) - DHCPv4 client is enabled.
disabled(0) - DHCPv4 client is disabled.
The default value is 1.
SNMP SET is not supported.
Note: DHCPv4 server should be disabled when enabling DHCP client.
ruckusDhcpGlobalAutoUpdateConfigState
1.3.6.1.4.1.1991.1.1.3.46.1.2
Syntax: Integer
Read-write
Configure state for DHCP client
auto-update on the global level.
enabled(1) - DHCPv4 client
auto-update is enabled.
disabled(0) - DHCPv4 client auto-update
is disabled.
The default value is 1.
SNMP SET is not
supported.
ruckusDhcpClientSpecificVEPort
1.3.6.1.4.1.1991.1.1.3.46.1.3
Syntax:
InterfaceIndexOrZero
Read-write
Configure state of DHCP client on specific VE at the global
level.
If DHCP client is configured at specific VE, ifIndex of the DHCP
client enabled VE port is returned.
If DHCP Client is not configured on VE port, zero is returned.
The default value is 0. SNMP SET is not supported.
Note: DHCPv4 client
should be enabled globally when enabling DHCP client on specific
VE. In switch, the feature is not supported and zero value will
be returned for this OID."