|
inetCidrRouteNumber
|
1.3.6.1.2.1.4.24.6
|
IPv4 and IPv6
|
read-only
|
The number of current inetCidrRouteTable entries that are not
invalid
|
|
inetCidrRouteTable
|
1.3.6.1.2.1.4.24.7
|
IPv4 and IPv6
|
not-accessible
|
This entity's IP Routing table
|
|
inetCidrRouteEntry
|
1.3.6.1.2.1.4.24.7.1
|
IPv4 and IPv6
|
not-accessible
|
A particular route to a particular destination, under a
particular policy (as reflected in the inetCidrRoutePolicy
object).
|
|
inetCidrRouteDestType
|
1.3.6.1.2.1.4.24.7.1.1
|
IPv4 and IPv6
|
not-accessible
|
The type of the inetCidrRouteDest address, as defined in the
InetAddress MIB
|
| inetCidrRouteDest |
1.3.6.1.2.1.4.24.7.1.2
|
IPv4 and IPv6
|
not-accessible
|
The destination IP address of this route.
|
|
inetCidrRoutePfxLen
|
1.3.6.1.2.1.4.24.7.1.3
|
IPv4 and IPv6
|
not-accessible
|
Indicates the number of leading one bits that form the mask to
be logical-ANDed with the destination address before being
compared to the value in the inetCidrRouteDest field.
|
|
inetCidrRoutePolicy
|
1.3.6.1.2.1.4.24.7.1.4
|
IPv4 and IPv6
|
not-accessible
|
This object is an opaque object without any defined semantics.
Its purpose is to serve as an additional index that may
delineate between multiple entries to the same destination. The
value { 0 0 } shall be used as the default value for this
object.
|
|
inetCidrRouteNextHopType
|
1.3.6.1.2.1.4.24.7.1.5
|
IPv4 and IPv6
|
not-accessible
|
The type of the inetCidrRouteNextHop address, as defined in the
InetAddress MIB.
|
|
inetCidrRouteNextHop
|
1.3.6.1.2.1.4.24.7.1.6
|
IPv4 and IPv6
|
not-accessible
|
On remote routes, the address of the next system en route. For
non-remote routes, a zero length string.
The type of this address is determined by the value of the
inetCidrRouteNextHopType object.
|
|
inetCidrRouteIfIndex
|
1.3.6.1.2.1.4.24.7.1.7
|
IPv4 and IPv6
|
read-create
|
The ifIndex value that identifies the local interface through
which the next hop of this route should be reached. A value of 0
is valid and represents the scenario where no interface is
specified.
|
|
inetCidrRouteType
|
1.3.6.1.2.1.4.24.7.1.8
|
IPv4 and IPv6
|
read-create
|
The type of route. Note that local(3) refers to a route for which
the next hop is the final destination; remote(4) refers to a
route for which the next hop is not the final destination.
Routes that do not result in traffic forwarding or rejection
should not be displayed, even if the implementation keeps them
stored internally.
reject(2) refers to a route that, if matched, discards the
message as unreachable and returns a notification (e.g., ICMP
error) to the message sender. This is used in some protocols as
a means of correctly aggregating routes.
blackhole(5) refers to a route that, if matched, discards the
message silently.
|
|
inetCidrRouteProto
|
1.3.6.1.2.1.4.24.7.1.9
|
IPv4 and IPv6
|
read-only
|
The routing mechanism via which this route was learned. Inclusion
of values for gateway routing protocols is not intended to imply
that hosts should support those protocols.
|
|
inetCidrRouteAge
|
1.3.6.1.2.1.4.24.7.1.10
|
IPv4 and IPv6
|
read-only
|
The number of seconds since this route was last updated or
otherwise determined to be correct. Note that no semantics of
'too old' can be implied, except through knowledge of the
routing protocol by which the route was learned.
|
|
inetCidrRouteNextHopAS
|
1.3.6.1.2.1.4.24.7.1.11
|
IPv4 and IPv6
|
read-create
|
The Autonomous System Number of the Next Hop. The semantics of
this object are determined by the routing- protocol specified in
the route's inetCidrRouteProto value. When this object is
unknown or not relevant, its value should be set to zero.
|
|
inetCidrRouteMetric1
|
1.3.6.1.2.1.4.24.7.1.12
|
IPv4 and IPv6
|
read-create
|
The primary routing metric for this route. The semantics of this
metric are determined by the routing- protocol specified in the
route's inetCidrRouteProto value. If this metric is not used,
its value should be set to -1.
|
|
inetCidrRouteMetric2
|
1.3.6.1.2.1.4.24.7.1.13
|
IPv4 and IPv6
|
read-create
|
An alternate routing metric for this route. The semantics of this
metric are determined by the routing- protocol specified in the
route's inetCidrRouteProto value. If this metric is not used,
its value should be set to -1.
|
|
inetCidrRouteMetric3
|
1.3.6.1.2.1.4.24.7.1.14
|
IPv4 and IPv6
|
read-create
|
An alternate routing metric for this route. The semantics of this
metric are determined by the routing- protocol specified in the
route's inetCidrRouteProto value. If this metric is not used,
its value should be set to -1.
|
|
inetCidrRouteMetric4
|
1.3.6.1.2.1.4.24.7.1.15
|
IPv4 and IPv6
|
read-create
|
An alternate routing metric for this route. The semantics of this
metric are determined by the routing- protocol specified in the
route's inetCidrRouteProto value. If this metric is not used,
its value should be set to -1.
|
|
inetCidrRouteMetric5
|
1.3.6.1.2.1.4.24.7.1.16
|
IPv4 and IPv6
|
read-create
|
An alternate routing metric for this route. The semantics of this
metric are determined by the routing- protocol specified in the
route's inetCidrRouteProto value. If this metric is not used,
its value should be set to -1.
|
|
inetCidrRouteStatus
|
1.3.6.1.2.1.4.24.7.1.17
|
IPv4 and IPv6
|
read-create
|
The row status variable, used according to row installation and
removal conventions. A row entry cannot be modified when the
status is marked as active(1).
|
|
inetCidrRouteDiscards
|
1.3.6.1.2.1.4.24.8
|
IPv4 and IPv6
|
read-only
|
The number of valid route entries discarded from the
inetCidrRouteTable. Discarded route entries do not appear in the
inetCidrRouteTable. One possible reason for discarding an entry
would be to free-up buffer space for other route table
entries.
|