Verifying Auto Image Copy

Samples in this section must be replaced with samples from a model other than the ICX 7750.
Use the show stack command to check for any units in the mismatch state after the stack is formed. The following example shows that stack unit 2 is not operational, due to an image mismatch. 
T=1h10m1.8: alone: standalone, D: dynamic cfg, S: static
ID   Type          Role    Mac Address    Pri State   Comment
1  S ICX7750-26QXG active  748e.f8f9.6300   0 local   Ready
2  S ICX7750-26QXG member  cc4e.2438.7280   0 remote  NON-OP: image mismatch
3  S ICX7750-26QXG standby cc4e.2438.7500   0 remote  Ready

    active       standby
    +---+        +---+        +---+
=2/1| 1 |2/4==2/1| 3 |2/4--2/1| 2 |2/4=
|   +---+        +---+        +---+   |
|                                     |
|-------------------------------------|

Parent topic: Auto Image Copy for Stack Units