Using a Specific VLAN to Restrict Remote Access
Remote access using Telnet, TFTP, SNMP, and Web Management to RUCKUS ICX devices can
be controlled using a specific VLAN ID.
By default, a RUCKUS device does not control remote management access based on the VLAN ID of the managing device. You can restrict remote management access to ports within a specific VLAN for the following access methods:
The following steps demonstrate how to restrict remote management access for the above access methods. All steps are optional, and in no specific order.
- Enter global configuration mode.
- Restrict Telnet access to clients in a specific VLAN.
This step allows Telnet access to the device only to clients connected to ports within port-based VLAN 10.
- Restrict TFTP access to clients in a specific VLAN.
This step allows TFTP access to the device only to clients connected to ports within port-based VLAN 40.
- Restrict SNMP access to clients in a specific VLAN.
- Restrict Web Management access to clients in a specific VLAN.
This step allows Web Management access to the device only to clients connected to ports within port-based VLAN 20.