The
show aaa command displays information about all TACACS/TACACS+ and RADIUS servers identified
on the device.
device# show aaa
Tacacs+ key: foundry
Tacacs+ retries: 1
Tacacs+ timeout: 15 seconds
Tacacs+ Server: 10.95.6.90 Port:49:
opens=6 closes=3 timeouts=3 errors=0
packets in=4 packets out=4
no connection
Radius key: networks
Radius retries: 3
Radius timeout: 3 seconds
Radius Server: 10.95.6.90 Auth Port=1812 Acct Port=1813:
opens=2 closes=1 timeouts=1 errors=0
packets in=1 packets out=4
no connection The following table describes the RADIUS information displayed by the
show aaa command.
Output of the show aaa Command for RADIUS
Field
|
Description
|
Radius default key
|
The setting configured with the
radius-server key command. At the Super User privilege level, the actual text of the key is displayed.
At the other privilege levels, a string of periods (....) is displayed instead of
the text.
|
Radius retries
|
The setting configured with the
radius-server retransmit command.
|
Radius timeout
|
The setting configured with the
radius-server timeout command.
|
Radius Server
|
For each RADIUS server, the IP address and
the following statistics are displayed: Auth Port RADIUS authentication port number (default 1812)
Acct Port RADIUS accounting port number (default 1813)
- opens - Number of times the port was opened for communication with the server
- closes - Number of times the port was closed normally
- timeouts - Number of times port was closed due to a timeout
- errors - Number of times an error occurred while opening the port
- packets in - Number of packets received from the server
- packets out - Number of packets sent to the server
|
connection
|
The current connection status. This can be
"no connection" or "connection active."
|
The
show web connection command displays the privilege level of Web Management Interface users.