Displaying information about ACLs

You can display information about the currently active user-defined and dynamically applied ACLs.

Displaying user-defined ACLs

To display the user-defined IP ACLs active on the device, enter the following command. 

device# show dot1x ip-ACL
Port 1/3 (User defined IP ACLs):
Extended IP access list Port_1/3_E_IN
permit udp any any

Displaying dynamically applied ACLs

To display the dynamically applied IP ACLs that are active on an interface, enter a command such as the following. 

device# show dot1x ip-acl ethernet 1/1/15
-------------------------------------------------------------------
Port      MAC              Inbound     Outbound   Inbound   Outbound
          Addr             IPv4 ACL    IPv4 ACL   IPv6 ACL  IPv6 ACL	
-------------------------------------------------------------------
1/1/15	 0180.c200.0003   10           11          20        21
1/1/15	 0180.c300.0005   100          101         120       121