cycle-time

Sets a limit as to how many seconds users have to be authenticated by Web Authentication.
Syntax
cycle-time seconds
no cycle-time seconds
Command Default

The default is 600 seconds.

Parameters
seconds
Specifies the authentication cycle time. Valid values are from 0 through 3600 seconds. If the value is set to 0, then there is no limit.
Modes

Web Authentication configuration mode

Usage Guidelines

You can set a limit as to how many seconds users have to be authenticated by the Web Authentication by defining a cycle time. This time begins upon the first Login attempt by the user on the Login page. If the user has not been authenticated successfully when this time expires, the user must enter a valid URL again to display the Web Authentication Welcome page.

The no form of the command resets the time to the default.

Examples

The following example sets the cycle time to 100 seconds. 

device(config)# vlan 10
device(config-vlan-10)# webauth
device(config-vlan-10-webauth)# cycle-time 100
Parent topic: Commands C